How to Service and Repair an Oil Cooler on Dodge Caliber?

Before you start working on the oil cooler, raise the car on a hoist and drain out the coolant. After that, remove the oil cooler's coolant hoses, remove the oil filter (3) and then get rid of the oil cooler connector bolt (2). Go ahead and take out the oil cooler when you are finished (1). It is important to realize that cleaning the oil cooler is forbidden; when either rebuilding or replacing the engine, the cooler should also be replaced.

How to Install an Oil Cooler on Dodge Caliber?

Replace the oil cooler seal 1 before you move on to installing the oil cooler. After that, lubricate the seal and put the oil cooler into place at the oil filter adapter so that the notch matches the tab. Put in the connector bolt 2 and tighten it to 55 Nm (41 ft. lbs.). After that, add the oil filter 3 and put the oil cooler coolant hose in place. Finally, drive the vehicle to the ground and fill the cooling system.

OEM Dodge Caliber Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Coolers found

View related parts
Dodge Caliber Oil Cooler Part Number: 4884757AE
$103.32 MSRP: $155.00
You Save: $51.68 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Engine Oil; Engine Oil Cooler; Cooler Engine Oil
- Replaces: 4884757AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Transmission Cooler Part Number: 68025160AA
$234.53 MSRP: $345.00
You Save: $110.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Auxiliary Transmission Oil; Automatic Transmission Oil Cooler; Auxiliary Cooler; Transmission oil cooler for vehicles built before 11/01/2009.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Transmission Cooler Part Number: 5191315AA
Product Specifications
- Other Name: Cooler - Auxiliary Transmission Oil; Automatic Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Caliber | R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Transmission Cooler Part Number: 68004055AA
Product Specifications
- Other Name: Cooler - Auxiliary Transmission Oil; Automatic Transmission Oil Cooler; Automatic Transmission Oil Cooler Assembly; Oil Cooler; Auxiliary Cooler; Cooler Auxiliary Transmission Oil
- Replaces: 68079416AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Oil Cooler

Choose OEM Oil Cooler that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Cooler follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Oil Cooler is one of the vital and useful parts that play a huge role in making Dodge Caliber cars more and more reliable. Aid of the engine oil and maintain the viscosity of the oil, this engine oil coiler is specifically to reduce the breakdown of oil when the engine is hot to enable efficient functioning of the engine. Installed as a component of the cooling system of a vehicle, the Dodge Caliber Oil Cooler employs an oil to water system in order to control oil temperatures, which are important for the hot functioning of the engine, in particular when the car is used in such conditions as towing or in a hot climate. The Dodge Caliber Oil Cooler is a vital component since a problem with the factory cooler results in the oil's contamination and cooling efficiency loss, which threatens the engine's life. This oil cooler is suitable for many Dodge Caliber models manufactured between 2007 and 2012 fitting into the vehicle's needs when it comes to performance and security. Most notably, the Dodge Caliber Oil Cooler is quite unique in the automotive market because of it's appreciable build quality and it's alternative role of maintaining low oil temperatures for elongated engine life. Saying that it is easy to install into the existing cooling system, compatible with several variants of engines, the Dodge Caliber Oil Cooler proves that Dodge understands what is important for its customers and invests into creation of the automobiles that will be both reliable and effective, ensuring safe driving experience for the owners of the Caliber sedans.

Dodge Caliber Oil Cooler Parts and Q&A

Transmission Cooler
5191315AA
Q: How to Service and Repair an Oil Cooler on Dodge Caliber?
A:
Before you start working on the oil cooler, raise the car on a hoist and drain out the coolant. After that, remove the oil cooler's coolant hoses, remove the Oil Filter (3) and then get rid of the oil cooler connector bolt (2). Go ahead and take out the oil cooler when you are finished (1). It is important to realize that cleaning the oil cooler is forbidden; when either rebuilding or replacing the engine, the cooler should also be replaced.
Oil Cooler
4884757AE
Q: How to Install an Oil Cooler on Dodge Caliber?
A:
Replace the oil cooler seal 1 before you move on to installing the oil cooler. After that, lubricate the seal and put the oil cooler into place at the Oil Filter adapter so that the notch matches the tab. Put in the connector bolt 2 and tighten it to 55 Nm (41 ft. lbs.). After that, add the oil filter 3 and put the oil cooler coolant hose in place. Finally, drive the vehicle to the ground and fill the cooling system.