How to Service and Repair a Control Arm Bushing on the Lower Control Arm for Front Bushing on Dodge Caravan?

To start, lower the control arm off of the cradle and mount it in a vise before servicing the bushing. Use the Bushing Receiver, Special Tool 6908-2, Bushing Remover 6908-1, Nut 6908-3, thrust washer, threaded rod and small nut to take off the front bushing. Stand the threaded rod still and dry-fit it so you can then tighten Special Tool 6908-3 which will force the lower control arm bushing into Bushing Receiver, Special Tool 6908-2. When assembling, insert the two rubber blocks in the directional front bushing so they are in line and hold up the lower control arm securely in a vise. Get the Bushing Receiver, Special Tool 6908-5, Bushing Installer, Special Tool 6908, Nut, Special Tool 6908-3, threaded rod and small nut ready for assembly. Keep the threaded rod as still as you can and start tightening the Nut, Special Tool 6908-3 which will pull the front bushing into the lower control arm until you can't feel any space between the bushing and arm. After that, secure the lower control arm to its place on the front suspension cradle.

How to Disassemble and Repair a Control Arm Bushing in the Rear Suspension on Dodge Caravan?

Be sure to take the rear lower control arm off the front suspension cradle before tending to the rear hydro bushing. After that, clamp the lower control arm into a vise so it stays in place without using too much pressure. Make sure Removal Pin, Special Tool 8460-3, goes through the center hole in the bushing's rear, using Special Tool 8460 to place Remover on the hydro-bushing. After that, secure fully the forcing screw on Bridge, Special Tool 8460-1, to dismount the bushing from the lower control arm.

OEM Dodge Caravan Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arm Bushings found

View related parts
Dodge Caravan Lower Control Arm Bushing Part Number: 4684120
$13.54 MSRP: $24.00
You Save: $10.46 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Spring Front Bushing; Bushings; Arm, Front Lower Control (LCA) , Right; Bushing Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2007 Dodge Caravan | Base, C/V, ES, Ec, LE, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
View related parts
Dodge Caravan Lower Control Arm Bushing Part Number: 4743556AA
$24.46 MSRP: $37.90
You Save: $13.44 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Caravan | Base, C/V, ES, Ec, LE, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
View related parts
Dodge Caravan Control Arm Bushing Part Number: 5272084
$7.36 MSRP: $9.34
You Save: $1.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Front Suspension Control Arm Pivot; Suspension Control Arm Bushing Kit; Axle Pivot Bushing.; Lower Control Arm Bushing; Front Control Arm and Crossmember Bushings.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L GAS
View related parts
Dodge Caravan Control Arm Bushing Part Number: 5272098
Product Specifications
- Other Name: Bushing - Front Suspension Control Arm Pivot - Rear; Suspension Control Arm Bushing Kit.; Lower Control Arm Bushing; Rear Bushing for Standard Suspension.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L GAS
View related parts
Dodge Caravan Lower Control Arm Rear Bushing Part Number: 4743095AA
Product Specifications
- Other Name: Bushing - Pivot; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing Lower Control Arm; Bushing Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Caravan | Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Dodge Caravan Control Arm Bushing

Choose OEM Control Arm Bushing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Control Arm Bushing follows strict manufacturing steps to lock in quality and fit. If your Dodge Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caravan Control Arm Bushing is the crucial part of the suspension system and has always been described as one of the most reliable and high-performance products suitable for different models of Dodge Caravan. These Control Arm Bushings are mounted between the control arms and the vehicle's chassis and have the primary function of dampening and directly controlling the amount of movement permitted based on the road surface and driver input. The Dodge Caravan which has been in production from 1984 to 2020 has had several generations and all have had the pleasure of the Control Arm Bushing. Suits made for other models such as the Dodge Grand Caravan describe the versatility of these bushings and explain why they are vital in preserving the operations and stability of the automobile. It can be noted that Control Arm Bushing has rubber, steel and synthetic elastomer construction, thus making it possible to offer the desired level of durability for each Caravan model. This flexibility also enhances the refinement and durability of the suspension system in addition to influencing of the ride quality. Also, regarding the specificity of the automotive market, it is necessary to emphasize that the Dodge Caravan Control Arm Bushing is made with the focus on innovation and maximum performance for comfort. These bushings help to keep the relevant suspension parts well-aligned which otherwise would wear out the other suspension parts very quickly these bushings are therefore very vital for any person that owns the Dodge Caravan and would wish to have a safe and comfortable ride all the time.

Dodge Caravan Control Arm Bushing Parts and Q&A

Lower Control Arm Bushing
4684120
Q: How to Service and Repair a Control Arm Bushing on the Lower Control Arm for Front Bushing on Dodge Caravan?
A:
To start, lower the Control Arm off of the cradle and mount it in a vise before servicing the bushing. Use the Bushing Receiver, Special Tool 6908-2, Bushing Remover 6908-1, Nut 6908-3, thrust washer, threaded rod and small nut to take off the front bushing. Stand the threaded rod still and dry-fit it so you can then tighten Special Tool 6908-3 which will force the lower control arm bushing into Bushing Receiver, Special Tool 6908-2. When assembling, insert the two rubber blocks in the directional front bushing so they are in line and hold up the lower control arm securely in a vise. Get the Bushing Receiver, Special Tool 6908-5, Bushing Installer, Special Tool 6908, Nut, Special Tool 6908-3, threaded rod and small nut ready for assembly. Keep the threaded rod as still as you can and start tightening the Nut, Special Tool 6908-3 which will pull the front bushing into the lower control arm until you can't feel any space between the bushing and arm. After that, secure the lower control arm to its place on the front suspension cradle.
Lower Control Arm Bushing
4743556AA
Q: How to Disassemble and Repair a Control Arm Bushing in the Rear Suspension on Dodge Caravan?
A:
Be sure to take the rear lower Control Arm off the front suspension cradle before tending to the rear hydro bushing. After that, clamp the lower control arm into a vise so it stays in place without using too much pressure. Make sure Removal Pin, Special Tool 8460-3, goes through the center hole in the bushing's rear, using Special Tool 8460 to place Remover on the hydro-bushing. After that, secure fully the forcing screw on Bridge, Special Tool 8460-1, to dismount the bushing from the lower control arm.