How to Install a Center Console Base on Dodge Challenger?

Next, set the floor console into the vehicle and attach the electric connectors. Place the fasteners on the front of the center console and turn each screw to 3 Nm (27 in. lbs.). Then, attach the fasteners in the rear bin and tighten them to 5 Nm (44 in. lbs.). After that, fit the shifter bezel into the car and secure the electrical cables to it. After placing the mat in the console rear bin, fit the shifter boot and bezel next. Place the gear selector in Park, then cover the shifter shaft with the ring and slide the shift knob onto the shaft until it's well seated. Lastly, slide the final retaining ring onto the knob, then join the battery terminal to the negative wire on the shifter.

How to Remove the Center Console Base on Dodge Challenger?

Before taking the floor console out, apply the parking brake, put the ignition into On, step on the brakes and move the gear into Neutral. After that, turn the ignition off and let go of the service brakes. Unplug the negative cable of the battery. Take a small flat bladed tool or something similar and remove the retaining ring, then lower the shifter shaft. Hold the shifter knob and take it off the shifter shaft. Open the console rear bin, remove the support mat, the boot around the shifter and the shifter bezel. Use a trim stick to break the attachment between the console bezel and console and then remove the electrical connectors. Take out the rear bin fasteners holding the console to the floor panel transmission tunnel and then take out the front fasteners joining the console to the instrument panel. Pull the console rearward to detach the connections and then remove it from below the steering wheel.

OEM Dodge Challenger Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Center Console Bases found

View related parts
Dodge Challenger Console Base, Center Part Number: 68048518AA
$62.78 MSRP: $120.00
You Save: $57.22 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console - Base; Center Console, Center; Center Console Base
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014, 2008-2009 Dodge Challenger | R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Console Base, Center Part Number: 68260169AB
$88.66 MSRP: $132.00
You Save: $43.34 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console - Floor Console; Center Console, Center; Center Console Base; Bin Floor Console
- Position: Center
- Replaces: 68260169AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Console Base, Center Part Number: 68260030AB
$123.50 MSRP: $183.00
You Save: $59.50 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console - Floor Console; Center Console, Center; Center Console Base; Bin Floor Console
- Position: Center
- Replaces: 68260030AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Console Base, Center Part Number: 68048311AA
Product Specifications
- Other Name: Console - Base; Center Console, Center; Center Console Base
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2014 Dodge Challenger | R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Center Console Base

Choose OEM Center Console Base that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Center Console Base follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger Center Console Base Parts and Q&A

Console Base, Center
68048311AA
Q: How to Install a Center Console Base on Dodge Challenger?
A:
Next, set the floor console into the vehicle and attach the electric connectors. Place the fasteners on the front of the center console and turn each screw to 3 Nm (27 in. lbs.). Then, attach the fasteners in the rear bin and tighten them to 5 Nm (44 in. lbs.). After that, fit the shifter bezel into the car and secure the electrical cables to it. After placing the mat in the console rear bin, fit the shifter boot and bezel next. Place the gear selector in Park, then cover the shifter shaft with the ring and slide the shift knob onto the shaft until it's well seated. Lastly, slide the final retaining ring onto the knob, then join the battery terminal to the negative wire on the shifter.
Console Base, Center
68048518AA
Q: How to Remove the Center Console Base on Dodge Challenger?
A:
Before taking the floor console out, apply the parking brake, put the ignition into On, step on the brakes and move the gear into Neutral. After that, turn the ignition off and let go of the service brakes. Unplug the negative cable of the battery. Take a small flat bladed tool or something similar and remove the retaining ring, then lower the shifter shaft. Hold the shifter knob and take it off the shifter shaft. Open the console rear bin, remove the support mat, the boot around the shifter and the shifter bezel. Use a trim stick to break the attachment between the console bezel and console and then remove the electrical connectors. Take out the rear bin fasteners holding the console to the floor panel transmission tunnel and then take out the front fasteners joining the console to the instrument panel. Pull the console rearward to detach the connections and then remove it from below the steering wheel.