How to Install a Cooling Fan Assembly for Your Radiator on Dodge Challenger?

To install Radiator Cooling Fan, position the fan motor on the radiator fan shroud and clamp in place by means of mounting bolts; tighten bolts to 10 Nm (89 In. lbs.). Then, the fan blade is attached to the motor and the retaining nut if fastened to 25 Nm (221. In. lbs.). Install the cooling fan mounting bolts and tighten to 6 Nm (50 In. lbs.) then place the radiator cooling fan assembly in the vehicle. Attach the cooling fan electrical connector and place the upper radiator hose. Then install the air filter housing and fill the cooling system. Finally run the engine until it reaches normal operating temperature and then check the cooling system and the automatic transmission for proper fluid levels.

How to Service and Repair a Cooling Fan Assembly on Dodge Challenger?

Prior to anything else, you should first unhook the negative battery cable. Partially siphon out the water from the cooling system. After that, remove the air filter housing assembly and take out the upper radiator hose. After unhooking the cooling fan's electrical connector, take out the bolts that hold the cooling fan in place. After you remove the radiator cooling fan assembly, pull out the fan blade from the motor and finally get rid of the motor.

OEM Dodge Challenger Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Cooling Fan Assemblys found

View related parts
Dodge Challenger Fan Motor, Front Part Number: 68050129AA
$322.91 MSRP: $477.00
You Save: $154.09 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly - Radiator Cooling; Engine Cooling Fan; Dual Radiator and Condenser Fan.; Fan Assembly; Includes Shroud, Motor, Single Fan And Jumper Wiring; Engine Cooling Fan Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Cooling Fan, Front Part Number: 5137713AA
$75.49 MSRP: $113.00
You Save: $37.51 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Blade, Front; Dual Radiator Fan Assembly; Radiator Fan Assembly; Fan Shroud; Fan Blade; Fan Module; Fan Cooling
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SE, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Fan Motor, Front Part Number: 5137714AA
$251.94 MSRP: $351.00
You Save: $99.06 (29%)
ADD TO CART
Product Specifications
- Other Name: Motor - Radiator Fan; Engine Cooling Fan Motor, Front, Front Left, Left; Motor; Motor Radiator Fan
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SE, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Fan Motor, Passenger Side Part Number: 5072330AB
$242.25 MSRP: $338.00
You Save: $95.75 (29%)
ADD TO CART
Product Specifications
- Other Name: Motor - Radiator Fan; Engine Cooling Fan Motor, Front Right, Right; Motor Radiator Fan
- Position: Passenger Side
- Replaces: 5170741AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2017 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, SE, SRT 392, SRT8, Scat Pack, T/A, T/A 392 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Fan Assembly Part Number: 68541987AA
$1353.63 MSRP: $2045.00
You Save: $691.37 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Radiator Cooling; Fan Module
- Replaces: 5181995AC, 5181995AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 6.2L V8, 8 Cyl 6.2 L GAS

Dodge Challenger Cooling Fan Assembly

Choose OEM Cooling Fan Assembly that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Cooling Fan Assembly follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger Cooling Fan Assembly Parts and Q&A

Cooling Fan, Front
5137713AA
Q: How to Install a Cooling Fan Assembly for Your Radiator on Dodge Challenger?
A:
To install Radiator Cooling Fan, position the fan motor on the radiator fan shroud and clamp in place by means of mounting bolts; tighten bolts to 10 Nm (89 In. lbs.). Then, the fan blade is attached to the motor and the retaining nut if fastened to 25 Nm (221. In. lbs.). Install the cooling fan mounting bolts and tighten to 6 Nm (50 In. lbs.) then place the radiator cooling fan assembly in the vehicle. Attach the cooling fan electrical connector and place the upper radiator hose. Then install the air filter housing and fill the cooling system. Finally run the engine until it reaches normal operating temperature and then check the cooling system and the automatic transmission for proper fluid levels.
Fan Motor, Front
5137714AA
Q: How to Service and Repair a Cooling Fan Assembly on Dodge Challenger?
A:
Prior to anything else, you should first unhook the negative Battery Cable. Partially siphon out the water from the cooling system. After that, remove the air filter housing assembly and take out the upper radiator hose. After unhooking the cooling fan's electrical connector, take out the bolts that hold the cooling fan in place. After you remove the radiator cooling fan assembly, pull out the fan blade from the motor and finally get rid of the motor.