How to Install a Radiator for Engine Cooling on Dodge Challenger?

Set the cooling radiator in the engine compartment and make sure the lower rubber isolators slide into their mounting holes on the radiator support. Put on the radiator mounting brackets and secure them with bolts, fastening them so that they reach 12 Nm (106 in. lbs.). Fit the condenser onto the radiator and put in place the upper mounting bolts, tighten them to 6 Nm (50 in. lbs.). Support the vehicle, fit the lower condenser to the mounting bracket and tighten the bolts to 10 Nm (88 in. lbs.). Attach the lower radiator hose and clamp and then lower the vehicle after. Start by placing the fan assembly, after that the hose going to the radiator, checking it does not meet the hood or pull on the belt near the engine. Screw in the upper radiator stabilizer panels and plug in the battery's negative cable. Power up your engine and proceed to drive the vehicle a bit so it warms up and the temperature shows normal. Then, inspect the body and auto parts to see they have the right amount of coolant and fluid.

How to Remove the Engine Cooling Radiator on Dodge Challenger?

Before removing the engine cooling radiator, first disconnect the negative battery cable and empty the system. Remove the upper radiator hose after that and proceed by taking off the upper radiator closure panels. Following this, remove the radiator fan assembly. Lift up the vehicle and them take out the splash shield that covers the bottom of the engine. Following that, unplug the lower radiator house and undo the lower condenser mounting bolts. Take down the vehicle and remove the upper radiator hose. Always remove the upper radiator bolts by hand since they are equipped with a tread locker. Next, remove both the upper radiator brackets and the screws, then remove all of the bolts supporting the upper condenser. With your journey almost complete, get the condenser assembly out of the radiator, tip the radiator back so it's facing the engine and take it out of the vehicle.

OEM Dodge Challenger Radiator

Cooling Radiator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Radiators found

View related parts
Dodge Challenger Radiator Part Number: 5170742AA
$285.52 MSRP: $421.00
You Save: $135.48 (33%)
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program, Order at Mopar.com.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023, 2008 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Radiator Part Number: 68050126AB
$419.07 MSRP: $610.00
You Save: $190.93 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program, Order at Mopar.com.
- Replaces: 68050126AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | GT, R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, Rallye Redline, SE, SRT8, SXT, SXT Plus, T/A | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Radiator Part Number: 68050131AA
$437.58 MSRP: $660.00
You Save: $222.42 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program Only, Order at Mopar.com
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Auxiliary Radiator Part Number: 68318329AA
$130.27 MSRP: $194.00
You Save: $63.73 (33%)
ADD TO CART
Product Specifications
- Other Name: Cooler - Auxiliary Low Temperature; Cooler Auxiliary Low Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS

Dodge Challenger Radiator

Choose OEM Radiator that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Radiator follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This is a Chrysler part known as Dodge Challenger Radiator that tasks are to help dissipate heat within the engine. A radiator is a heat exchanger that's located between the engine coolant, into which heat is transferred from the engine and air blowing through the core that is made of fins and tubes arranged in the middle. Current designs of Dodge Challenger Radiators have an aluminum core embraced by plastic or aluminum tanks; however, copper/brass radiators are also produced. As clearly stated, the radiator usually locates at the front area of the automobile to benefit from the air supplied by the car-grille for the heat exchange. The performance radiators for the Dodge Challenger automobiles are generally a step above the ones that come with the factory systems and this is due to their aluminum body that is lightweight and designed to enhance the cooling system of the automobiles. They have more numbers of larger and more tubes than the factory radiators to optimize the heat exchange and superior finning to maintain a low operating temperature of the engine. They come as direct fit performance radiators for those who do not have to modify the radiator much and as universal that are used where modification of the radiator is required such as in street rods, custom cars and race cars. In summary, the Dodge Challenger Radiator plays a crucial role in enhancing the functionality as well as the durability of the car's engine.

Dodge Challenger Radiator Parts and Q&A

Radiator
5170742AA
Q: How to Install a Radiator for Engine Cooling on Dodge Challenger?
A:
Set the cooling radiator in the engine compartment and make sure the lower rubber isolators slide into their mounting holes on the radiator support. Put on the radiator mounting brackets and secure them with bolts, fastening them so that they reach 12 Nm (106 in. lbs.). Fit the condenser onto the radiator and put in place the upper mounting bolts, tighten them to 6 Nm (50 in. lbs.). Support the vehicle, fit the lower condenser to the mounting bracket and tighten the bolts to 10 Nm (88 in. lbs.). Attach the lower radiator hose and clamp and then lower the vehicle after. Start by placing the fan assembly, after that the hose going to the radiator, checking it does not meet the hood or pull on the belt near the engine. Screw in the upper radiator stabilizer panels and plug in the battery's negative cable. Power up your engine and proceed to drive the vehicle a bit so it warms up and the temperature shows normal. Then, inspect the body and auto parts to see they have the right amount of coolant and fluid.
Radiator
68050126AB
Q: How to Remove the Engine Cooling Radiator on Dodge Challenger?
A:
Before removing the engine cooling radiator, first disconnect the negative Battery Cable and empty the system. Remove the upper radiator hose after that and proceed by taking off the upper radiator closure panels. Following this, remove the radiator fan assembly. Lift up the vehicle and them take out the splash shield that covers the bottom of the engine. Following that, unplug the lower radiator house and undo the lower condenser mounting bolts. Take down the vehicle and remove the upper radiator hose. Always remove the upper radiator bolts by hand since they are equipped with a tread locker. Next, remove both the upper radiator brackets and the screws, then remove all of the bolts supporting the upper condenser. With your journey almost complete, get the condenser assembly out of the radiator, tip the radiator back so it's facing the engine and take it out of the vehicle.