How to Remove the Washer Reservoir on Dodge Challenger?

To do this, you should disconnect and isolate the battery's negative cable first. After that, take off the front fascia the proper way for your front bumper cover. Separate the electrical connectors from the washer fluid reservoir and take out the hose, pouring the washer fluid into a proper container below. After that, remove the fastener at the rear and the remaining three fasteners. After that, take the washer fluid reservoir out of the vehicle.

How to Install a Washer Reservoir on Dodge Challenger?

Insert your washer fluid reservoir (4) in the vehicle and secure it with the three fasteners (1), tightening them to 7 Nm (62 in. lbs.). After that, put on the rear mounting fastener (2), secure it and tighten it to 7 Nm (62 in. lbs). Link the connectors on your spray gun to the washer fluid tank through the hose. Once that's done, add the front fascia and link the battery negative cable. At the end, ensure the washer fluid reservoir is filled.

OEM Dodge Challenger Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Washer Reservoirs found

View related parts
Dodge Challenger Washer Reservoir Part Number: 68125524AA
$110.00 MSRP: $165.00
You Save: $55.00 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Windshield Washer
- Replaces: 68125524AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Washer Reservoir Part Number: 68617758AA
$68.41 MSRP: $103.00
You Save: $34.59 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Dodge Challenger | GT, R/T, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SXT, T/A 392 Widebody | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Washer Reservoir Part Number: 5170706AA
$46.62 MSRP: $60.55
You Save: $13.93 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Windshield Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Challenger Washer Reservoir

Choose OEM Washer Reservoir that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Washer Reservoir follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Windshield Washer Reservoir is an important component which is used to contain windshield washer fluid in the Dodge Challenger cars for better sight for drivers. Usually made of hard plastic, the reservoir's location in the engine compartment also differs, as some models put it behind the engine, while others place it near the headlight. Subsequently, it is probable that Dodge Challenger models have employed different styles of the Windshield Washer Reservoir throughout the years, while particular differences are not identified. In all of them the factor remains the toughness of the part itself, as it plastic over time Yellow and becomes brittle and cracks if it is not filled with washer fluid sufficiently. This brings out the need of performing service check up on the Windshield Washer Reservoir in order to enhance its proficiency in Dodge Challenger cars.

Dodge Challenger Washer Reservoir Parts and Q&A

Washer Reservoir
68125524AA
Q: How to Remove the Washer Reservoir on Dodge Challenger?
A:
To do this, you should disconnect and isolate the battery's negative cable first. After that, take off the front fascia the proper way for your front bumper cover. Separate the electrical connectors from the washer fluid reservoir and take out the hose, pouring the washer fluid into a proper container below. After that, remove the fastener at the rear and the remaining three fasteners. After that, take the washer fluid reservoir out of the vehicle.
Washer Reservoir
5170706AA
Q: How to Install a Washer Reservoir on Dodge Challenger?
A:
Insert your washer fluid reservoir (4) in the vehicle and secure it with the three fasteners (1), tightening them to 7 Nm (62 in. lbs.). After that, put on the rear mounting fastener (2), secure it and tighten it to 7 Nm (62 in. lbs). Link the connectors on your spray gun to the washer fluid tank through the hose. Once that's done, add the front fascia and link the battery negative cable. At the end, ensure the washer fluid reservoir is filled.