How to Install a Trunk Lid Latch on Dodge Challenger?

For better results, start by putting the latch against the top end of the decklid. Screw on the fasteners for the latch, tightening them to 8 Nm (71 in. lbs.) inside the decklid. Attach the body wire harness connector taken out for the decklid to the latch connector. After the battery has been removed for service, attach the negative battery cable using the standard way given in the manual. After that, shut the decklid.

OEM Dodge Challenger Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Latch found

View related parts
Dodge Challenger Lock Actuator, Rear Part Number: 4589217AF
$85.83 MSRP: $114.00
You Save: $28.17 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Decklid; Deck Lid Latch, Rear; Trunk Latch; Lock; Latch; Latch Deck Lid
- Position: Rear
- Replaces: 4589217AB, 4589217AD, 4589217AC, 4589217AA, 4589217AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Trunk Lid Latch

Choose OEM Trunk Lid Latch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Trunk Lid Latch follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Trunk Lid Latch of Dodge Challenger cars has the critical responsibility of holding the trunk lid in place so that superimposed loads are secure and cannot be opened unauthorized. This mechanism is somewhat like a car seat belt where a push is needed to unlock it to open, the same is true of this structure. Made from such materials as stainless steel the Dodge Challenger Trunk Lid Latch holds the trunk lid firmly in place in an event of a crash, strong winds or any other force that may come along. Different kinds of Trunk Lid Latch might have been used in Dodge Challenger car in the course of the years aiming at increasing safety or reliability. The Trunk Lid Latch is quite important because its failure can result to a number of problems such as the trunk opening when the car is still in motion, this can be dangerous both to the vehicle and the contents inside. These sections require regular servicing and new components replacement to maintain proper working of the Trunk Lid Latch system which will in turn protect the valuable belongings placed inDodges Challenger trunk.

Dodge Challenger Trunk Lid Latch Parts and Q&A

Lock Actuator, Rear
4589217AF
Q: How to Install a Trunk Lid Latch on Dodge Challenger?
A:
For better results, start by putting the latch against the top end of the decklid. Screw on the fasteners for the latch, tightening them to 8 Nm (71 in. lbs.) inside the decklid. Attach the body wire harness connector taken out for the decklid to the latch connector. After the battery has been removed for service, attach the negative Battery Cable using the standard way given in the manual. After that, shut the decklid.