How to Install a Yaw Sensor and What Steps Should You Follow Next on Dodge Challenger?

Fit the dynamics sensor over the studs above the floor pan tunnel, align it with the holes on the studs and tighten the mounting nuts to 12 Nm (110 in. lbs.). After that, plug the wiring harness connector into the module. After, attach the floor console and join the negative battery cable to the battery post in the proper way. After that, carry out a Verification Test to clear any faults found.

How to Service and Repair a Yaw Sensor on Dodge Challenger?

Before you begin, detach the negative battery cable from its post and separate it from the battery. Following that, take out the floor console. After that, unplug the wiring harness connector from the sensor. At this point, take out the nuts that hold the sensor to the floor pan tunnel. Ultimately, take out the dynamics sensor from inside the vehicle.

OEM Dodge Challenger Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Yaw Sensors found

View related parts
Dodge Challenger Yaw Rate Sensor Part Number: 56029328AB
$217.86 MSRP: $326.00
You Save: $108.14 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Challenger | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Yaw Rate Sensor Part Number: 56029427AA
$445.41 MSRP: $649.00
You Save: $203.59 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Challenger
View related parts
Dodge Challenger Yaw Rate Sensor Part Number: 56029549AD
$374.42 MSRP: $545.00
You Save: $170.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; Suspension Yaw Sensor; Yaw Sensor; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Replaces: 56029549AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Challenger Yaw Sensor

Choose OEM Yaw Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Yaw Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger Yaw Sensor Parts and Q&A

Yaw Rate Sensor
56029328AB
Q: How to Install a Yaw Sensor and What Steps Should You Follow Next on Dodge Challenger?
A:
Fit the dynamics sensor over the studs above the floor pan tunnel, align it with the holes on the studs and tighten the mounting nuts to 12 Nm (110 in. lbs.). After that, plug the wiring harness connector into the module. After, attach the floor console and join the negative Battery Cable to the battery post in the proper way. After that, carry out a Verification Test to clear any faults found.
Yaw Rate Sensor
56029427AA
Q: How to Service and Repair a Yaw Sensor on Dodge Challenger?
A:
Before you begin, detach the negative Battery Cable from its post and separate it from the battery. Following that, take out the floor console. After that, unplug the wiring harness connector from the sensor. At this point, take out the nuts that hold the sensor to the floor pan tunnel. Ultimately, take out the dynamics sensor from inside the vehicle.