How to Replace a Brake Light Switch on Dodge Charger?

To install the brake light switch, press the plunger all the way out by holding the switch and carefully pulling on the plunger until it will not go farther. After that, link the wiring harness connector (1) with the stop lamp switch (2). Put the stop lamp switch into the bracket attached to the brake pedal (6) by pushing the brake pedal down to its end, matching the index key of the switch with the notch in the hole on the bracket's square end and turning it clockwise by 30 degrees so it locks into place. Pulling back too forcefully on the brake pedal may damage the stop lamp switch or striker, so use caution. There is a little piece that clicks when the switch is proper. Continue until it clicks and stays put. Test to see that the brake lamps and speed controls are functioning correctly.

OEM Dodge Charger Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Light Switches found

View related parts
Dodge Charger Stoplamp Switch Part Number: 56038969AC
$25.65 MSRP: $37.80
You Save: $12.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Brake Pedal; Brake Light Switch; Sensor Brake Pedal
- Replaces: 56038969AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Stoplamp Switch Part Number: 4373147
Product Specifications
- Other Name: Switch Stop Lamp & Speed Control; Switch, Stop Lamp And Speed Control; Stop Lamp, W/Speed Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Charger | Base, Shelby | 4 Cyl 2.2 L GAS

Dodge Charger Brake Light Switch

Choose OEM Brake Light Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Light Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

That is why Brake Light Switch in the Dodge Charger is important because it switch on the brake light whenever the brake pedal is depressed. This mechanism is very important in making the drivers behind the Dodge Charger to know that the vehicle is slowing down or coming to a stop thus increasing safety on the road. In Dodge Charger models, different styles of Brake Light Switch have been used throughout the years though there is no explanation of that different between these types. Regardless of the style, the primary goal remains consistent: so that the brake lights will be switched on timely in accordance with the operation of a driver. The Brake Light Switch is important to its proper functioning for enhancing light visibility and promoting communication on the road.

Dodge Charger Brake Light Switch Parts and Q&A

Brake Switch
4671336AD
Q: How to Replace a Brake Light Switch on Dodge Charger?
A:
To install the brake light switch, press the plunger all the way out by holding the switch and carefully pulling on the plunger until it will not go farther. After that, link the wiring harness connector (1) with the stop lamp switch (2). Put the stop lamp switch into the bracket attached to the brake pedal (6) by pushing the brake pedal down to its end, matching the index key of the switch with the notch in the hole on the bracket's square end and turning it clockwise by 30 degrees so it locks into place. Pulling back too forcefully on the brake pedal may damage the stop lamp switch or striker, so use caution. There is a little piece that clicks when the switch is proper. Continue until it clicks and stays put. Test to see that the brake lamps and speed controls are functioning correctly.