How to Service and Repair a Radiator Support on Dodge Charger?

The first step in servicing or repairing your radiator support is to take out and isolate the negative cable from the battery. Take out the front fascia and the headlamp units. Separate the headlamp wire harness from the horns and next, take out all the bolts which attach the horns to the headlamp mounting crossmember; then remove the horns. Show where the hood latch lies next to the front end of the crossmember to help you when you install the hood latch later. Take out the bolts that secure the radiator mounting brackets to the front lamp crossmember and mark where that crossmember connects with other parts. After that, mark the spot where the headlamp mounting crossmember should be placed at the front fenders and unbolt the crossmember from the front fender and frame rails. Take the headlamp mounting crossmember out of the area above the engine. To mount the headlamp, set the headlamp mounting crossmember where it sits in the motor compartment and lightly screw in the bolts that connect it to the fenders and frame. Put the crossmember in place and attach all bolts to 28 N.m on the mentioned points. Secure the horns with bolts and mount the headlamp units. Fasten the negative cable back to the battery, lower and close the hood gently and make sure the hood is properly locked and all the panels fit together.

OEM Dodge Charger Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Radiator Supports found

View related parts
Dodge Charger Mount Bracket Part Number: 5043097AB
$196.01 MSRP: $290.00
You Save: $93.99 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Radiator; Radiator Mount Bracket; Intercooler Bracket; Auxiliary Cooler Bracket; Bracket Radiator
- Replaces: 68205007AD, 68205007AE, 68205007AC, 68205007AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 6.2L V8, 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Lower Tie Bar, Front Part Number: 5065240AH
$283.25 MSRP: $418.00
You Save: $134.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Radiator; Radiator Support Panel Reinforcement, Front; Radiator Support Tie Bar, Front Lower; Crossmember
- Position: Front
- Replaces: 5065240AB, 5065240AG, 5065240AC, 5065240AE, 5065240AD, 5065240AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2023 Dodge Charger | Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Upper Tie Bar, Front Part Number: 4806163AE
$251.53 MSRP: $370.00
You Save: $118.47 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Support; Radiator Support Tie Bar, Front Upper
- Position: Front Upper
- Replaces: 4806163AA, 4806163AD, 4806163AC, 4806163AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Charger Radiator Support

Choose OEM Radiator Support that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Radiator Support follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Radiator Support Parts and Q&A

Lower Tie Bar, Front
5065240AH
Q: How to Service and Repair a Radiator Support on Dodge Charger?
A:
The first step in servicing or repairing your radiator support is to take out and isolate the negative cable from the battery. Take out the front fascia and the headlamp units. Separate the headlamp wire harness from the horns and next, take out all the bolts which attach the horns to the headlamp mounting crossmember; then remove the horns. Show where the Hood Latch lies next to the front end of the crossmember to help you when you install the hood latch later. Take out the bolts that secure the radiator mounting brackets to the front lamp crossmember and mark where that crossmember connects with other parts. After that, mark the spot where the headlamp mounting crossmember should be placed at the front fenders and unbolt the crossmember from the front fender and frame rails. Take the headlamp mounting crossmember out of the area above the engine. To mount the headlamp, set the headlamp mounting crossmember where it sits in the motor compartment and lightly screw in the bolts that connect it to the fenders and frame. Put the crossmember in place and attach all bolts to 28 N.m on the mentioned points. Secure the horns with bolts and mount the headlamp units. Fasten the negative cable back to the battery, lower and close the hood gently and make sure the hood is properly locked and all the panels fit together.