How to Install a Starter Motor for a 2.7L Engine on Dodge Charger?

Move the starter motor past the transmission, exhaust and the intermediate shafts and angling it upward to the engine to install it for your 2.7L engine. Pull the plastic retainer over the round opening in the dust shield, placing the TOP mark upwards and screw the dust shield on to the engine block with the help of the retainer. After that, set the starter and apply its bolts, making sure they are tightened to 54.2 Nm or 40 ft. lbs. Slide the electrical connection onto the starter, fit the flat parts in each shaft together and move the intermediate shaft over, lining the holes. Slide the pinch bolt onto the intermediate shaft, secure it to the extension and tighten it to 43 Nm (32 ft. lbs.). Lastly, secure the underbody splash shield and then lower the vehicle, remove the piece that holds the steering wheel and link the negative battery cable once more.

How to Service and Repair a Starter Motor on a 2.7L Engine on Dodge Charger?

Before you service or repair the starter motor on a 2.7L engine, remove the negative battery cable. After that, attach a steering wheel holder to hold the steering wheel in the middle position. Lift up the vehicle, then remove the underbody splash shield. Proceed to putting on the starter and remove the intermediate steering shaft center bolt. After taking off the bolt, part the upper and lower sections of the intermediate steering shaft. Remove the link between the starter and the electrical, then take out the three bolts that hold the starter and the wiring clip. Pull the starter toward you and down, curve it up and around the exhaust and slip it past the intermediate steering shaft, then take it out of the car.

OEM Dodge Charger Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Starter motors found

View related parts
Dodge Charger Starter Part Number: 56029852AB
$326.75 MSRP: $484.00
You Save: $157.25 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 56029852AA, R6029852AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Charger | GT, GT Plus, Pursuit, SE, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Charger Starter Part Number: 4801852AB
$324.48 MSRP: $480.00
You Save: $155.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Replaces: RL801852AB, 4801694AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Dodge Charger | Pursuit, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Charger Starter Part Number: 4608801AC
$247.44 MSRP: $366.00
You Save: $118.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4608801AA, 4608801AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2023 Dodge Charger | Daytona, Daytona R/T, Pursuit, R/T, R/T Road & Track, SE | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Starter Bolt Part Number: 5030076AD
$301.03 MSRP: $457.00
You Save: $155.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter; Starter Engine
- Replaces: 5030076AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2023 Dodge Charger | 6.2L V8
- 2007-2010 Dodge Charger | 6.1L V8
View related parts
Dodge Charger Starter Part Number: 68066177AB
$402.69 MSRP: $611.00
You Save: $208.31 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Replaces: 68066177AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2015 Dodge Charger | SRT Hellcat, SRT8 | 6.2L V8, 6.4L V8, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Starter Part Number: 4896464AE
$364.02 MSRP: $552.00
You Save: $187.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4896464AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2023 Dodge Charger | Daytona, Pursuit, R/T, R/T Road & Track, SE, SRT8 | 5.7L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Starter Part Number: R0171382
Product Specifications
- Other Name: Starter Assembly 2.2L
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1986 Dodge Charger | 2.2, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Starter Part Number: 4671130
Product Specifications
- Other Name: Starter - Assembly - Dw-1.1Kw; Starter Motor Reman; Starter Motor; Starters; Starter, 4 Cylinder 2.5 Engine; Starter, 4 Cylinder; Starter, Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Charger | Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Starter Part Number: 5035102AB
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 5035102AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6.4L V8, 8 Cyl 6.4 L GAS

Dodge Charger Starter Motor

Choose OEM Starter Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Starter Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Starter Motor Parts and Q&A

Starter
4896464AE
Q: How to Install a Starter Motor for a 2.7L Engine on Dodge Charger?
A:
Move the starter motor past the transmission, exhaust and the intermediate shafts and angling it upward to the engine to install it for your 2.7L engine. Pull the plastic retainer over the round opening in the dust shield, placing the TOP mark upwards and screw the dust shield on to the engine block with the help of the retainer. After that, set the starter and apply its bolts, making sure they are tightened to 54.2 Nm or 40 ft. lbs. Slide the electrical connection onto the starter, fit the flat parts in each shaft together and move the intermediate shaft over, lining the holes. Slide the pinch bolt onto the intermediate shaft, secure it to the extension and tighten it to 43 Nm (32 ft. lbs.). Lastly, secure the underbody splash shield and then lower the vehicle, remove the piece that holds the steering wheel and link the negative Battery Cable once more.
Starter
4608801AC
Q: How to Service and Repair a Starter Motor on a 2.7L Engine on Dodge Charger?
A:
Before you service or repair the starter motor on a 2.7L engine, remove the negative Battery Cable. After that, attach a steering wheel holder to hold the steering wheel in the middle position. Lift up the vehicle, then remove the underbody splash shield. Proceed to putting on the starter and remove the intermediate steering shaft center bolt. After taking off the bolt, part the upper and lower sections of the intermediate steering shaft. Remove the link between the starter and the electrical, then take out the three bolts that hold the starter and the wiring clip. Pull the starter toward you and down, curve it up and around the exhaust and slip it past the intermediate steering shaft, then take it out of the car.