How can a Backing Plate be serviced and repaired on Dodge Durango?

To service and repair the backing plate, begin by removing the wheel and tire assembly along with the brake drum. Next, take out the brake shoe assembly and disconnect the parking brake cable from the parking brake lever. Compress the parking brake cable retainer tabs and push the retainer and cable through the support plate. Disconnect the brake line at the wheel cylinder and remove the wheel cylinder from the support plate. Then, take out the axle shaft and remove the bolts that attach the support plate to the axle before removing the support plate itself. For installation, apply a bead of silicone sealer around the axle mounting surface of the support plate and install it on the axle flange, tightening the attaching bolts to 115 Nm (85 ft. lbs.). Next, apply a bead of silicone sealer around the wheel cylinder mounting surface and install the wheel cylinder, followed by the brake line in the wheel cylinder. Install the parking brake cable in the support plate and then the axle shaft. Connect the parking brake cable to the lever on the secondary shoe and install the brake shoes on the support plate, adjusting them to the drum with a brake gauge. Finally, reinstall the brake drum and wheel and tire assembly, and bleed the brake system.

OEM Dodge Durango Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Backing Plates found

View related parts
Dodge Durango Backing Plate, Front Passenger Side Part Number: 68257202AA
$10.33 MSRP: $15.40
You Save: $5.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 52124764AE, 52124764AD, 52124764AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Backing Plate, Front Driver Side Part Number: 68257203AA
$10.56 MSRP: $15.50
You Save: $4.94 (32%)
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 52124765AE, 52124765AD, 52124765AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Backing Plate, Rear Driver Side Part Number: 68466363AA
$100.53 MSRP: $139.00
You Save: $38.47 (28%)
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear Left; Brake Caliper Bracket; Brake Dust Shield; Brake Assembly; Adapter; Adapter Assembly Parking Brake
- Position: Rear Driver Side
- Replaces: 52124969AE, 52124969AD, 68273495AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Backing Plate, Rear Passenger Side Part Number: 68466362AA
$104.89 MSRP: $145.00
You Save: $40.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear Right; Brake Caliper Bracket; Brake Dust Shield; Brake Assembly; Adapter; Adapter Assembly Parking Brake
- Position: Rear Passenger Side
- Replaces: 52124968AD, 52124968AE, 68273494AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Backing Plate, Rear Passenger Side Part Number: 5014128AB
Product Specifications
- Other Name: Plate - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield; Plate Brake Backing
- Position: Rear Passenger Side
- Replaces: 5014128AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Durango | Base, R/T, SLT, SLT Plus, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Backing Plate, Rear Driver Side Part Number: 5014129AB
Product Specifications
- Other Name: Plate - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield; Plate Brake Backing
- Position: Rear Driver Side
- Replaces: 5014129AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Durango | Base, R/T, SLT, SLT Plus, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Durango Backing Plate

Choose OEM Backing Plate that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Backing Plate follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Durango Backing Plate Parts and Q&A

Backing Plate, Rear Passenger Side
5014128AB
Q:
How can a Backing Plate be serviced and repaired on Dodge Durango?
A:
To service and repair the backing plate, begin by removing the wheel and tire assembly along with the brake drum. Next, take out the brake shoe assembly and disconnect the parking brake cable from the parking brake lever. Compress the parking brake cable retainer tabs and push the retainer and cable through the support plate. Disconnect the brake line at the wheel cylinder and remove the wheel cylinder from the support plate. Then, take out the axle shaft and remove the bolts that attach the support plate to the axle before removing the support plate itself. For installation, apply a bead of silicone sealer around the axle mounting surface of the support plate and install it on the axle flange, tightening the attaching bolts to 115 Nm (85 ft. lbs.). Next, apply a bead of silicone sealer around the wheel cylinder mounting surface and install the wheel cylinder, followed by the brake line in the wheel cylinder. Install the parking brake cable in the support plate and then the axle shaft. Connect the parking brake cable to the lever on the secondary shoe and install the brake shoes on the support plate, adjusting them to the drum with a brake gauge. Finally, reinstall the brake drum and wheel and tire assembly, and bleed the brake system.