How to Remove and Replace the Serpentine Belt on a 3.7L/4.7L Engine on Dodge Durango?

To disconnect the negative battery cable remove and replace the serpentine accessory drive belt on a 3.7L/4.7L engine. After that, turn the belt tensioner 6 until it hits the stop. After that, remove accessory drive belt 2. Then slowly rotate tensioner 6 back into its free arm position, making sure that the tensioner arm does not snap back as this will severely damage the tensioner.

How to Install a Serpentine Belt on 3.7L/4.7L Engines on Dodge Durango?

In 3.7L/4.7L engines, check that all of the pulleys are not damaged before fitting the serpentine accessory drive belt. Route the belt around all pulleys except the idler pulley 5. Rotate the tensioner arm until it contacts its stop position and route the belt around the idler 5. Slowly let the tensioner rotate into the belt and check that the belt is seated onto all the pulleys. Following the installation of the accessory drive belt, check the belt wear indicator. For 4.7L engines, the dimension "A" measured from the tang to the housing stop must not exceed 24mm (0.94"). Replace the accessory drive belt if this measurement is acceptable.

OEM Dodge Durango Serpentine Belt

Serpentine Drive Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Serpentine Belts found

View related parts
Dodge Durango Serpentine Belt Part Number: 53010303AC
$69.07 MSRP: $105.00
You Save: $35.93 (35%)
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53010303AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 5184646AC
$41.74 MSRP: $62.10
You Save: $20.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Replaces: 5184646AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Durango | Citadel, Crew, Express, Heat, Special Service, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Serpentine Belt Part Number: 4593852AB
$42.92 MSRP: $61.70
You Save: $18.78 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Replaces: 4593852AA, 4593665AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited, SE, SLT | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 53032805AB
$74.51 MSRP: $104.00
You Save: $29.49 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 5135746AA
$61.20 MSRP: $82.90
You Save: $21.70 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032125AD, 53032380AE, 53032380AC, 53032380AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base, SLT, SLT Plus, Sport, SXT | 4.7L V8, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 53032817AB
$67.87 MSRP: $89.75
You Save: $21.88 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032817AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 5038718AA
$35.27 MSRP: $52.55
You Save: $17.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025, 2021 Dodge Durango | SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium | 8 Cyl 6.2 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 55111074AC
$24.19 MSRP: $48.85
You Save: $24.66 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Durango | 3.7L V6, 4.7L V8, 5.2L V8, 5.7L V8, 5.9L V8
View related parts
Dodge Durango Serpentine Belt Part Number: 68519480AA
$45.06 MSRP: $67.00
You Save: $21.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Supercharger Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Supercharger Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025, 2021 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 68495977AA
$49.21 MSRP: $66.70
You Save: $17.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53013676AB, 53013676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Special Service, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SXT | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Belt - Serpentine Part Number: 68027636AB
$52.90 MSRP: $71.70
You Save: $18.80 (27%)
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT, SXT | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 68207171AD
$46.46 MSRP: $67.00
You Save: $20.54 (31%)
Product Specifications
- Other Name: Belt - Supercharger Drive; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Supercharger Belt; Belt Supercharger Drive; Drive Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021 Dodge Durango | SRT Hellcat | 8 Cyl 6.2 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 5184647AB
$45.70 MSRP: $65.70
You Save: $20.00 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Serpentine Belt Part Number: 4627031AA
$35.32 MSRP: $50.70
You Save: $15.38 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Limited, R/T, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 5281374AA
$47.04 MSRP: $67.85
You Save: $20.81 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Serpentine Belt Part Number: 5192067AC
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
Dodge Durango Belt Tensioner Part Number: 53011558AA
$114.43 MSRP: $169.00
You Save: $54.57 (33%)
Product Specifications
- Other Name: Tensioner - Supercharger Drive Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Serpentine Tensioner; Tensioner
- Replaced by: 68617113AA
- Replaces: 68222744AE, 68222744AC, 68222744AB, 68222744AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2024, 2021 Dodge Durango | SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium | 8 Cyl 6.2 L GAS

Dodge Durango Serpentine Belt

Choose OEM Serpentine Belt that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Serpentine Belt follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Durango Serpentine Belt distributes engine power to essential belt-driven components so vital systems can work concurrently. Located in front of the engine, a single belt loops around a series of pulleys corresponding to the alternator, power steering pump, air conditioning compressor and water pump. Therefore, rotation of one shaft permits electric charging, steering assistance as well as cabin and engine cooling. Idler pulleys and a tensioner connect the Serpentine Belt to maintain grip and alignment and prevent slipping. The Serpentine Belt is continuously turning, and so it wears out over time owing to heat and load. If the belt breaks, it will cut off cooling circulation, battery charging, steering assist, and climate control, in turn, making the Dodge Durango immobile. A Serpentine Belt with wear may show some cracks or glazing that requires changing it. The Dodge Durango Serpentine Belt, also known as micro-v belt, poly-v belt, multi-rib belt or drive belt, is a belt-drive system that simplifies the multiple-belt configuration by space-saving design and mechanical efficiency. Every gasoline-powered Dodge Durango model features it to power essential systems quietly during regular use.

Dodge Durango Serpentine Belt Parts and Q&A

Serpentine Belt
4593852AB
Q:
How to Remove and Replace the Serpentine Belt on a 3.7L/4.7L Engine on Dodge Durango?
A:
To disconnect the negative battery cable remove and replace the serpentine accessory drive belt on a 3.7L/4.7L engine. After that, turn the Belt Tensioner 6 until it hits the stop. After that, remove accessory drive belt 2. Then slowly rotate tensioner 6 back into its free arm position, making sure that the tensioner arm does not snap back as this will severely damage the tensioner.
Belt - Serpentine
68027636AB
Q:
How to Install a Serpentine Belt on 3.7L/4.7L Engines on Dodge Durango?
A:
In 3.7L/4.7L engines, check that all of the pulleys are not damaged before fitting the serpentine accessory drive belt. Route the belt around all pulleys except the idler pulley 5. Rotate the tensioner arm until it contacts its stop position and route the belt around the idler 5. Slowly let the tensioner rotate into the belt and check that the belt is seated onto all the pulleys. Following the installation of the accessory drive belt, check the belt wear indicator. For 4.7L engines, the dimension "A" measured from the tang to the housing stop must not exceed 24mm (0.94"). Replace the accessory drive belt if this measurement is acceptable.