How to Install a Vacuum Pump on Dodge Durango?

To start, pass a lower bolt through the bundle of wires/tube on the air conditioner, then place the bolt in the bottom spot on the electric pump bracket. At this point, install the bolts but do not tighten them. After that, install the upper bolt and nut, ensuring you tighten them to 40 Nm. Afterward, tighten the lower bolts to a value of 20 Nm. Put the battery cable junction block so that its tab is lined up with the hole and tighten its retainer bolt finger tight until the battery cables and top and bottom crimps are the same positions they were in for removal. Slide the red cables of your battery over the studs and insert the nut, tightening it to 10 Nm. Fasten the access cover for the positive battery cable, join the electrical connector to the vacuum pump and put the vacuum hose on the vacuum pump. Last, insert the 12 volt battery system ground isolation connector and return it to its bracket, then reset the Vacuum Pump Wear Out Counter in the Antilock Brake Module using a scan tool under Miscellaneous Tests.

OEM Dodge Durango Vacuum Pump

Vacuum Pressure Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vacuum Pumps found

View related parts
Dodge Durango Air Pump Part Number: 5154322AA
$193.74 MSRP: $288.00
You Save: $94.26 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump - Air; Power Brake Booster Vacuum Pump; Vacuum Pump; Pump Vacuum; Pump Air
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, R/T, Rallye, SXT, Special Service | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Air Pump Part Number: 4581954AB
$297.98 MSRP: $443.00
You Save: $145.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Air; Power Brake Booster Vacuum Pump; Vacuum Pump; Pump Air
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2019 Dodge Durango | Citadel, GT, Limited, Pursuit, R/T, SRT, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Air Pump Part Number: 68443859AB
$348.08 MSRP: $513.00
You Save: $164.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Vacuum; Power Brake Booster Vacuum Pump; Vacuum Pump; Pump Vacuum
- Replaces: 68443859AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Plus, R/T Premium, Rallye, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Vacuum Pump Part Number: 5186000AE
Product Specifications
- Other Name: Pump - Vacuum; Power Brake Booster Vacuum Pump; Power Brake Booster Bracket; Mount Bracket
- Replaces: 5186000AD, 5186000AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

Dodge Durango Vacuum Pump

Choose OEM Vacuum Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Vacuum Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Vacuum Pump is a great Commodity for increasing the functionality of Dodge Durango vehicles especially those containing a diesel engine. This basic part controls vacuum operated equipment like the power brake booster and heating and cooling actuators to guarantee the efficiency and safety of Dodge Durango. Unlike the conventional gasoline engine that produces manifold vacuum, the need for vacuum in some operations is created by the Vacuum Pump. The make of Vacuum Pump can be of Reciprocating Diaphragm type or Rotary Vane type and the same is usually operated through engine camshaft or alternator shaft. This versatility means that the Vacuum Pump can fit in most Durango models hence giving drivers a fair to use vehicle across the different models. Problems like noise or vacuum leak can be potentially catastrophic and can result to hard brake pedals and climate control issues, that is why diagnostic and removal should not be delayed. Especially in the automotive industry, the key of the attractiveness of cars and their components is comprised of appointments such as the powerful and reliable built-in Vacuum Pump of Dodge Durango cars. All in all, the positive impact of the Vacuum pump on the performance as well as safety of the Dodge Durango model speaks volumes about this vehicle's lineup, and the Vacuum pump indeed confirms the notion about Dodge Durango as a vehicle that equals or even outperforms rivals in terms of performance.

Dodge Durango Vacuum Pump Parts and Q&A

Vacuum Pump
5186000AE
Q: How to Install a Vacuum Pump on Dodge Durango?
A:
To start, pass a lower bolt through the bundle of wires/tube on the air conditioner, then place the bolt in the bottom spot on the electric pump bracket. At this point, install the bolts but do not tighten them. After that, install the upper bolt and nut, ensuring you tighten them to 40 Nm. Afterward, tighten the lower bolts to a value of 20 Nm. Put the battery cable junction block so that its tab is lined up with the hole and tighten its retainer bolt finger tight until the battery cables and top and bottom crimps are the same positions they were in for removal. Slide the red cables of your battery over the studs and insert the nut, tightening it to 10 Nm. Fasten the access cover for the positive battery cable, join the electrical connector to the vacuum pump and put the vacuum hose on the vacuum pump. Last, insert the 12 volt battery system ground isolation connector and return it to its bracket, then reset the Vacuum Pump Wear Out Counter in the Antilock Brake Module using a scan tool under Miscellaneous Tests.