How to Service and Repair a Brake Booster on Dodge Durango?

Take out the master cylinder before you disconnect the vacuum tubes from the vacuum brake booster. After that, take the clip off the push rod connected to the brake pedal and undo the nuts holding the booster to the car floor. Afterwards, get rid of the booster, spacer and gaskets from the front cowl panel. When installing, put the spacers and gaskets on the booster studs, place the studs into the holes on the cowl panel and upper the booster to the panel. Attach the bolts to the booster, don't forget to tighten them to 28 Nm (250 inch lbs.), add the push rod to the brake pedal and lock it in place with the clip. If you noticed the booster check valve was missing, set it in place and join the vacuum hose to the valve. The last step is to reattach the master cylinder and top off and flush the brake system.

How to Maintain and Fix a Brake Booster on Dodge Durango?

Before servicing the vacuum brake booster, remove the master cylinder, then break the vacuum lines at the booster. After that, unhook the clip holding the booster push rod to the brake pedal and take off the nuts on the booster mounting studs. Remove the booster, spacer and gaskets from the front cowl panel when that is done. When installing, use the spacer and gaskets on the booster studs, slip the booster studs into the panel holes and mount the booster to the panel. Attach the booster to the engine, tighten its holding nuts to 28 Nm (250 inch lbs.) and join the push rod to the brake pedal with a clip. Should the check valve be absent, fit it back on and secure the vacuum hose to it before putting the master cylinder in. After that, bleed and fill the brake system to its fullest capacity.

OEM Dodge Durango Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Boosters found

View related parts
Dodge Durango Brake Booster Part Number: 68306573AC
$254.93 MSRP: $377.00
You Save: $122.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster
- Replaces: 68306573AA, 68306573AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 4560182AF
$176.75 MSRP: $260.00
You Save: $83.25 (33%)
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster
- Replaced by: 4560182AG
- Replaces: 4560182AD, 4560182AB, 4560182AE, 4560182AC, 4560182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, R/T, Rallye, SXT, Special Service | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Power Booster Part Number: 5183199AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Power Brake; Brake Booster
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Durango | Adventurer, Limited, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 5013135AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 5013134AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 5013132AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Durango | R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Booster Assembly Part Number: 5010171AC
Product Specifications
- Other Name: Booster Power Brake; Power Brake Booster; Brake Booster
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Dodge Durango | Base, SLT | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 5102282AD
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Durango | Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 4883812AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Brake Booster Part Number: 68003623AC
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster; Booster Power Brake
- Replaces: 68003623AA, 68003623AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Power Booster Part Number: 68046478AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Power Brake; Brake Booster
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
Dodge Durango Brake Booster Part Number: 5179919AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster
- Replaces: 5179919AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Durango | Adventurer, Limited, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Dodge Durango Brake Booster

Choose OEM Brake Booster that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Booster follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Durango Brake Booster is an important part that draws lesser amount of pressure in order to apply brakes on the particular car. In the case of the brake booster, a vacuum chamber works to increase the hydraulic pressure coming from the master cylinder through the force exerted on the brake pedal by the driver. There are two main types of boosters used in Durango vehicles;vacuum operated boosters and hydraulic boosters. Vacuum boosters work on the principles of engine vacuum and the pressure that is available outside the automobile while hydraulic boosters work on fluid pressure for providing brake application. Depending on such factors as size and configuration of the booster with or without dual diaphragm, the degree of power assist that is available has to be well selected in order to enhance brake optimal performance.

Dodge Durango Brake Booster Parts and Q&A

Brake Booster
5013132AB
Q: How to Service and Repair a Brake Booster on Dodge Durango?
A:
Take out the master cylinder before you disconnect the vacuum tubes from the vacuum brake booster. After that, take the clip off the push rod connected to the brake pedal and undo the nuts holding the booster to the car floor. Afterwards, get rid of the booster, spacer and gaskets from the front cowl panel. When installing, put the spacers and gaskets on the booster studs, place the studs into the holes on the cowl panel and upper the booster to the panel. Attach the bolts to the booster, don't forget to tighten them to 28 Nm (250 inch lbs.), add the push rod to the brake pedal and lock it in place with the clip. If you noticed the booster check valve was missing, set it in place and join the vacuum hose to the valve. The last step is to reattach the master cylinder and top off and flush the brake system.
Brake Booster
5013134AB
Q: How to Maintain and Fix a Brake Booster on Dodge Durango?
A:
Before servicing the vacuum brake booster, remove the master cylinder, then break the vacuum lines at the booster. After that, unhook the clip holding the booster push rod to the brake pedal and take off the nuts on the booster mounting studs. Remove the booster, spacer and gaskets from the front cowl panel when that is done. When installing, use the spacer and gaskets on the booster studs, slip the booster studs into the panel holes and mount the booster to the panel. Attach the booster to the engine, tighten its holding nuts to 28 Nm (250 inch lbs.) and join the push rod to the brake pedal with a clip. Should the check valve be absent, fit it back on and secure the vacuum hose to it before putting the master cylinder in. After that, bleed and fill the brake system to its fullest capacity.