How to Maintain Your Cup Holder on Dodge Grand Caravan?

The cup holder screw covers are located at the bottom of the center bezel, under which you will find the center bezel screws. With a trim stick or similar tool, pry out the middle part of the instrument panel and support it so that it hangs off to the side, leaving the accessory switches connected. Pull the vehicle's cup holder backward to cause the rear guide studs to detach from the instrument panel and then remove the assembly from below. It is necessary to close the cup holder assembly for proper installation, since it must be installed fully assembled. Insert the cup holder assembly in the lower part of the instrument panel and push it all the way back, so the last pair of guide struts snap in place. Once all is done, attach the center bezel, use the screws to hold it in place and cover the screws at the bottom.

How to Install a Cup Holder Assembly on Dodge Grand Caravan?

Before installation, place the cup holder assembly in the closed position, so that the rail stays in the proper track location. Take the assembly and, placing the bottom near the front of the vehicle, slide it in until the back struts are secured. Following that, fit the center bezel and attach it with the screws you have set aside. After that, fit the screw access cover to the bottom part of the center bezel.

OEM Dodge Grand Caravan Cup Holder

Drink Holder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Cup Holders found

View related parts
Dodge Grand Caravan Cup Holder Part Number: ZS681DVAA
$97.84 MSRP: $161.00
You Save: $63.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Console Cup Holder; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Beige, Rear Part Number: 1JC93BD1AA
$59.48 MSRP: $87.50
You Save: $28.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder - Console Mounted; Console Cup Holder, Rear; Cupholder Console Mounted
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Grand Caravan | GT, SE, SE Plus, SXT | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Cup Holder Part Number: 5016129AA
$78.43 MSRP: $113.00
You Save: $34.57 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Beige, Rear Part Number: 1JC93DK5AA
$7.92 MSRP: $45.40
You Save: $37.48 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder - Console Mounted; Console Cup Holder, Rear; Cupholder Console Mounted
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Taupe Part Number: RR44WL5AE
$52.07 MSRP: $150.00
You Save: $97.93 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder
- Replaces: RR44WL5AD, RR44WL5AB, RR44WL5AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Grand Caravan | Base, EL, ES, EX, SE, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Rear Part Number: 1JC93BD5AA
$29.18 MSRP: $60.50
You Save: $31.32 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder - Console Mounted; Console Cup Holder, Rear; Cupholder Console Mounted
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Cup Holder Part Number: RR44ZJ3AE
$70.50 MSRP: $135.00
You Save: $64.50 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Grand Caravan | Anniversary Edition, C/V, EX, SE, SXT | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder Part Number: RR44BD1AE
$104.13 MSRP: $165.00
You Save: $60.87 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Grand Caravan | Base, C/V, SE, SE Plus, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Black, Rear Part Number: 1JC93DX9AA
$64.75 MSRP: $95.25
You Save: $30.50 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder - Console Mounted; Console Cup Holder, Rear; Cupholder Console Mounted
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Rear Part Number: 68064758AB
$218.67 MSRP: $322.00
You Save: $103.33 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Rear Seat; Seat Armrest Cup Holder, Rear; Cup Holder Rear Seat
- Position: Rear
- Replaces: 68064758AA, 5102309AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2020 Dodge Grand Caravan | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6
View related parts
Dodge Grand Caravan Cup Holder, Black Part Number: 1PE37DX9AB
$251.53 MSRP: $371.00
You Save: $119.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Console Cup Holder; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Beige Part Number: 1PE37BD1AB
$251.53 MSRP: $371.00
You Save: $119.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Holder - Instrument Panel; Console Cup Holder; Cupholder Instrument Panel
- Replaces: 1PE37BD1AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Rear Part Number: 1JC93XDVAA
Product Specifications
- Other Name: Cupholder - Console Mounted; Console Cup Holder, Rear; Cupholder Console Mounted
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Taupe Part Number: GE48WL5
$29.58 MSRP: $42.50
You Save: $12.92 (31%)
Product Specifications
- Other Name: Holder - Instrument Panel; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Grand Caravan | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Green Part Number: RR44ZP7AD
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Grand Caravan | Anniversary Edition, C/V, EX, SE, SXT | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Rear Part Number: 5103325AA
Product Specifications
- Other Name: Cupholder; Seat Armrest Cup Holder, Rear; Cupholder Use After 1-13-03
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Grand Caravan | Base, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder Part Number: 4460774
Product Specifications
- Other Name: Holder Cup; Holder, Cup, W/Stirrups And Springs; Holder, Cup
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1993 Dodge Grand Caravan | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Gray Part Number: RR44BD5AE
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EX, SE, SE Plus, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Beige Part Number: ZS681K5AA
Product Specifications
- Other Name: Holder - Instrument Panel; Console Cup Holder; Cupholder Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Cup Holder, Beige, Rear Part Number: 1JC93HL5AA
Product Specifications
- Other Name: Cupholder - Console Mounted; Console Cup Holder, Rear; Cupholder Console Mounted
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Dodge Grand Caravan Cup Holder

Choose OEM Cup Holder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Cup Holder follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This Dodge Grand Caravan Cup Holder is an important part that truly represents one of the main characteristics of the Dodge Grand Caravan series. A play part Object which is made purposely to safely contain beverage during sharp turns and bumpy rides the Cup Holder makes the driving experience more comfortable and safe for drivers and passengers. Located throughout the Dodge Grand Caravan's interior in the driver side, the passenger side, and the rear, Cup Holders have become flexible enough to fit numerous cup cup sizes for everyone's beverage preference while on the road. They proved to be versatile as based on the models produced from 1984 to 2020, the Dodge Grand Caravan remains as one of the popular vehicles for families. Thus, the Cup Holder is not only ergonomically useful but also organizational, helping the drivers not to distract their hands by holding a beverage. Also, the Dodge Grand Caravan Cup Holder being different from the other car parts in the automotive market is quite sensible due to the possibilities it provides as well as such refinements as the prevention of spills and the accessibility of the cup holder. Being a family minivan, the Dodge Grand Caravan has always been the model with the primary focus on passengers and their comfort as well as safety, which is why having reliable Cup Holder installed ensures that those who chose this car will get exactly what they need for their everyday ride.

Dodge Grand Caravan Cup Holder Parts and Q&A

Cup Holder
RR44BD1AE
Q: How to Maintain Your Cup Holder on Dodge Grand Caravan?
A:
The cup holder screw covers are located at the bottom of the center bezel, under which you will find the center bezel screws. With a trim stick or similar tool, pry out the middle part of the instrument panel and support it so that it hangs off to the side, leaving the accessory switches connected. Pull the vehicle's cup holder backward to cause the rear guide studs to detach from the instrument panel and then remove the assembly from below. It is necessary to close the cup holder assembly for proper installation, since it must be installed fully assembled. Insert the cup holder assembly in the lower part of the instrument panel and push it all the way back, so the last pair of guide struts snap in place. Once all is done, attach the center bezel, use the screws to hold it in place and cover the screws at the bottom.
Cup Holder, Rear
5103325AA
Q: How to Install a Cup Holder Assembly on Dodge Grand Caravan?
A:
Before installation, place the cup holder assembly in the closed position, so that the rail stays in the proper track location. Take the assembly and, placing the bottom near the front of the vehicle, slide it in until the back struts are secured. Following that, fit the center bezel and attach it with the screws you have set aside. After that, fit the screw access cover to the bottom part of the center bezel.