To get started with installing the front door exterior handle, if applicable install the lock cylinder onto the exterior door handle. Insert the front of the outer door handle into the door, then push down on the outer door handle linkage arm and install the rear of the handle to the door. First, fit three bolts to the interior side of the exterior door handle, tightening each to 5 Nm (44 in. lbs.). Through the access opening in the carrier plate, connect the two linkage rods to the external door handle and ensure that the retaining clips are fully latched. If fitted, install the shield for the door lock cylinder at the door, using the hole in the carrier plate. The round close-out plug must be installed on the carrier plate, and the front door trim panel must attach.