How is the rear upper control arm installed on Dodge Journey?

Strategically set the upper control arm on the car, insert the bolt and nut that secure it, but do not yet tighten them. After that, fit the bolt and nut that attach the upper control arm to the knuckle, but don't tighten them yet. After that, add the wheel and tire and make sure you tighten the wheel fixing nuts to 135 Nm (100 ft. lbs.). Suspend your car on an alignment rack or lift it onto a drive-on lift, lowering it to get at the bolts and nuts when needed. At the crossmember, tighten the upper control arm mounting bolt nut to 105 Nm (77 ft. lbs.) and at the knuckle, tighten it to the same thing. Wheel alignment should be done whenever needed.

How to remove the front lower control arm on Dodge Journey?

Endeavor to raise and underpin your vehicle before removing the front lower control arm. Come next, take out the wheel mounting nuts and remove the wheel and tire assembly after that. In the next stage, take out the nut holding the lower ball joint to the lower control arm and then use Remover 9360 to disconnect the lower ball joint before you lift the knuckle. Be careful not to pull outward on the knuckle, because this may damage the inner C/V joint on the half shaft. At the ends of the stabilizer bar, with the lower stabilizer bar link stud secured, take off the nut that is holding the link to the stabilizer bar and rotate the ends upward away from the lower control arm. Following this, take out the front bolt holding the lower control arm to the front suspension crossmember and then, remove the nut and the bolt at the rear end. The last step is to pull out the control arm from the crossmember.

OEM Dodge Journey Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
Dodge Journey Lower Control Arm, Rear Part Number: 5085418AD
$102.08 MSRP: $156.00
You Save: $53.92 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Rear Lower Rearward; Arm Lower Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Replaces: 5085418AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Lower Control Arm, Front Passenger Side Part Number: 4766424AF
$297.98 MSRP: $444.00
You Save: $146.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Front Right; Arm Lower Control Front; Suspension Control Arm; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 4766424AA, 4766424AC, 4766424AB, 4766424AE, 4766424AD, 68149312AB, 68149312AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Lower Control Arm, Rear Part Number: 4766950AC
$87.29 MSRP: $194.00
You Save: $106.71 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Rear Lower Rearward; Lateral Link; Lateral Arm; Arm Lower Control Rear; Control Arm
- Position: Rear Lower
- Replaces: 4766950AD, 4766950AA, 4766950AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Lower Control Arm, Front Driver Side Part Number: 4766423AF
$91.04 MSRP: $134.00
You Save: $42.96 (33%)
Ships in 1-2 Business Days
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Front Left; Arm Lower Control Front; Suspension Control Arm; Control Arm
- Position: Front Lower Driver Side
- Replaces: 4766423AC, 4766423AD, 4766423AE, 68149313AA, 4766423AA, 68149313AB, 4766423AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

Dodge Journey Control Arm

Choose OEM Control Arm that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Control Arm follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Journey Control Arm is an important automobile-part which greatly improves the efficiency of the Dodge Journey, a crossover automobile that is regarded as functional and safe. Being a suspension component that connects the frame with the Wheels, the Control Arm provides support to other critical parts to enable free wheel movement in relation to the surface irregularity. It is crucial for thermal management and as a result, correct camber, toe, and ride height settings, better handling, and reduced rot / wear of the tires, especially when the car is raced or lowered. Dodge Journey Control Arm suits and can be fitted to different models of Dodge Journey hence making sure that the journey control arm Contributes to the efficiency and safety of the car. Also, the latest models of Dodge Journey possess the Control Arms that are manufactured from materials such as cast iron or aluminum alloys that can ensure high durability along with comparatively low weight. This not only increases the ability of the vehicle's mechanical properties, but at the same time strengthens the position of the car in the automotive market. Also, some unique features in the Dodge Journey include a superior braking system apart from the control arm making the car safe to drive. In summary, the Dodge Journey Control Arm is a factor that stays robust and relevant for the retention of the Journey's performance over time and it is for its fundamental significance in the vehicle's dynamics that cannot be overstated.

Dodge Journey Control Arm Parts and Q&A

Lower Control Arm, Rear
5085418AD
Q: How is the rear upper control arm installed on Dodge Journey?
A:
Strategically set the upper control arm on the car, insert the bolt and nut that secure it, but do not yet tighten them. After that, fit the bolt and nut that attach the upper control arm to the knuckle, but don't tighten them yet. After that, add the wheel and tire and make sure you tighten the wheel fixing nuts to 135 Nm (100 ft. lbs.). Suspend your car on an alignment rack or lift it onto a drive-on lift, lowering it to get at the bolts and nuts when needed. At the crossmember, tighten the upper control arm mounting bolt nut to 105 Nm (77 ft. lbs.) and at the knuckle, tighten it to the same thing. Wheel alignment should be done whenever needed.
Lower Control Arm, Front Passenger Side
4766424AF
Q: How to remove the front lower control arm on Dodge Journey?
A:
Endeavor to raise and underpin your vehicle before removing the front lower control arm. Come next, take out the wheel mounting nuts and remove the wheel and tire assembly after that. In the next stage, take out the nut holding the lower Ball Joint to the lower control arm and then use Remover 9360 to disconnect the lower ball joint before you lift the knuckle. Be careful not to pull outward on the knuckle, because this may damage the inner C/V joint on the half shaft. At the ends of the stabilizer bar, with the lower stabilizer bar link stud secured, take off the nut that is holding the link to the stabilizer bar and rotate the ends upward away from the lower control arm. Following this, take out the front bolt holding the lower control arm to the front suspension crossmember and then, remove the nut and the bolt at the rear end. The last step is to pull out the control arm from the crossmember.