How to service the Crankshaft Position Sensor on a 3.5L engine on Dodge Journey?

In order to service the crankshaft position sensor on a 3.5L engine, first disconnect and isolate the negative battery cable. Next, unlock the crankshaft position sensor's electrical connector and disconnect it. The sensor is located on the driver side above the differential housing and its bottom sits above drive plate. In the end, unscrew the mounting of the sensor and extract it.

How to install the Crankshaft Position Sensor on a 3.5L engine on Dodge Journey?

To install the Crankshaft Position Sensor on a 3.5L engine, first check the sensor O-ring for damage and replace it if necessary. Make sure to lubricate the O-ring with clean engine oil road before installation. Make sure to insert the crankshaft position sensor into the transmission case with a twisting motion all the way till it is fully seated so that the sensor and its mounting tang are completely flush to the mounting surface. To 12 Nm (105 in. lbs.), install and tighten the retaining bolt while holding the sensor in place. Subsequently, connect and lock the electrical connector to the CKP sensor, then connect the negative cable to the battery and tighten the nut to 5 N.m (45 in. lbs.) After any repair of the powertrain system or after replacing components such as the flywheel, valvetrain, camshaft, and the crankshaft sensors, the Cam/Crank Variation Relearn must be performed.

OEM Dodge Journey Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Position Sensors found

View related parts
Dodge Journey Crankshaft Position Sensor Part Number: 5029811AD
$75.91 MSRP: $112.00
You Save: $36.09 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 5029811AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 2.7L V6, 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Crankshaft Position Sensor Part Number: 5149167AF
$88.71 MSRP: $131.00
You Save: $42.29 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; ECM; Sensor Crankshaft Position
- Replaces: 5149167AE, 5149167AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Crankshaft Position Sensor Part Number: 5033307AE
$93.10 MSRP: $140.00
You Save: $46.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor Crankshaft Position
- Replaced by: 5033307AF
- Replaces: 5033307AB, 5033307AD, 5033307AC, 5033307AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crossroad, Express, SE, SE Value, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Journey Crankshaft Position Sensor Part Number: 5029808AD
Product Specifications
- Other Name: Engine Camshaft Position Sensor; Camshaft Position Sensor; Sensor Camshaft
- Replaces: 68013184AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 6 Cyl 3.5 L GAS

Dodge Journey Crankshaft Position Sensor

Choose OEM Crankshaft Position Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Crankshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The powertrain control module receives a signal from the Dodge Journey Crankshaft Position Sensor that monitors the speed and position of the engine crankshaft. The Crankshaft Position Sensor controls accurately fuel injection and ignition timing which helps in the initiation and functioning of the engine. The Crankshaft Position Sensor component, located close to the crank pulley, flywheel, camshaft or the crankshaft itself, emits electronic impulses that allow the control unit to adjust the engine parameters. A failed Crankshaft Position Sensor on a Dodge vehicle, such as a Journey, can result in hard starting, stalling, misfiring, or rough idling because the control module loses accurate data about crankshaft position. Sensor configurations consist of inductive components that operate in a passive manner, Hall-effect and magnetoresistive types, which register the presence of a magnetic field, optical variants that provide highly precise detection but may end up contaminated with debris that interferes with the projecting light beams. All Crankshaft Position Sensor styles operate similarly like all Dodge Journey engines. They help track the angle of the crankshaft and engine RPM. The housing unit is sealed to protect it from the heat vibrations, corrosion and exposure in order to maintain signal integrity during the operation of the Dodge Journey.

Dodge Journey Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
5029811AD
Q:
How to service the Crankshaft Position Sensor on a 3.5L engine on Dodge Journey?
A:
In order to service the crankshaft position sensor on a 3.5L engine, first disconnect and isolate the negative battery cable. Next, unlock the crankshaft position sensor's electrical connector and disconnect it. The sensor is located on the driver side above the differential housing and its bottom sits above drive plate. In the end, unscrew the mounting of the sensor and extract it.
Crankshaft Position Sensor
5033307AE
Q:
How to install the Crankshaft Position Sensor on a 3.5L engine on Dodge Journey?
A:
To install the Crankshaft Position Sensor on a 3.5L engine, first check the sensor O-ring for damage and replace it if necessary. Make sure to lubricate the O-ring with clean engine oil road before installation. Make sure to insert the crankshaft position sensor into the transmission case with a twisting motion all the way till it is fully seated so that the sensor and its mounting tang are completely flush to the mounting surface. To 12 Nm (105 in. lbs.), install and tighten the retaining bolt while holding the sensor in place. Subsequently, connect and lock the electrical connector to the CKP sensor, then connect the negative cable to the battery and tighten the nut to 5 N.m (45 in. lbs.) After any repair of the powertrain system or after replacing components such as the flywheel, valvetrain, camshaft, and the crankshaft sensors, the Cam/Crank Variation Relearn must be performed.