How to Detach the Exterior Emblem on Dodge Journey?

Place masking tape along the body of the car, running next to the top edge of the nameplate. If it's cooler than 21°C (70°F), put the emblem under a heat lamp or heat gun, but don't let the temperature rise above 52°C (120°F). After that, place a plastic trim stick or hard wood wedge behind the emblem to remove the adhesive from the body. At the end, scrub any adhesive off the body with Mopar® Super Kleen solvent or a similar cleaner.

How to Install an Emblem on the Body on Dodge Journey?

Before attaching the body emblem, take the carrier off the adhesive tape found on its backside. Then, correctly place the emblem on the body and press down with your palm. If it's below 21°C (70°F) in the area, heat the emblem using a heat lamp or gun to avoid any issues with adhesion, but do not let the temperature go over 52°C (125°F).

OEM Dodge Journey Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Emblems found

View related parts
Dodge Journey Emblem, Front Part Number: 68159580AA
$75.19 MSRP: $133.00
You Save: $57.81 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate; Grille Emblem, Front; Nameplate Dodge With Stripes
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2020 Dodge Journey | AVP, Crew, Crossroad, GT, Limited, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Nameplate, Rear Part Number: 68081675AB
$70.02 MSRP: $103.00
You Save: $32.98 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Deck Lid Emblem, Rear; Hatch Emblem, Rear; Nameplate Dodge Center Of Liftgate; Lift Gate Center; Decklid Center; With Stripes.
- Position: Rear
- Replaces: 68081675AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Emblem, Silver, Rear Part Number: 68213511AB
$76.93 MSRP: $114.00
You Save: $37.07 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate; Deck Lid Emblem, Rear; Fender Emblem, Front; Hatch Emblem, Rear; Nameplate Gt Gt Liftgate; Nameplate Gt Gt Fender; Nameplate Gt Gt
- Position: Rear
- Replaces: 68213511AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2019 Dodge Journey | GT | 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Emblem, Front Part Number: 5155674AA
$77.16 MSRP: $114.00
You Save: $36.84 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Ram Head; Bumper Cover Emblem, Front; Grille Emblem, Front; Medallion; Medallion Ram Head All Applications; Medallion Ram Head Front Fascia; Medallion Ram Head
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Center Cap Part Number: 1SK35SZ0AA
$37.29 MSRP: $53.65
You Save: $16.36 (31%)
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Nameplate, Red Part Number: 68354593AB
$89.79 MSRP: $133.00
You Save: $43.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate - Liftgate; Nameplate Liftgate Rhombi; Nameplate Liftgate
- Replaces: 68354593AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2019 Dodge Journey | Crossroad, GT, SE, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Center Cap Part Number: 6CZ27DX8AA
$14.59 MSRP: $21.40
You Save: $6.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Journey | Crossroad, GT, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Center Cap Part Number: 6CZ27SZ7AA
$20.37 MSRP: $29.95
You Save: $9.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018 Dodge Journey | Crossroad, GT, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Emblem, Rear Part Number: 5155658AA
Product Specifications
- Other Name: Silencer - Dash Panel; Deck Lid Emblem, Rear; Hatch Emblem, Rear; Medallion
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

Dodge Journey Emblem

Choose OEM Emblem that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Journey symbolizes brand quality assurance through its emblem which represents dependable performance in automotive markets. This unique brand emblem functions as a hood ornament and trunk attachment to help customers identify Dodge Journey vehicles specifically among vehicles using their rebadged models. The Dodge Journey has earned reputation through functionality thus becoming the budget-friendly three-row SUV with roomy dimensions perfect for family travel. The Dodge Journey Emblem serves dual purposes by delivering both enhanced exterior beauty while indicating the presence of front airbags and four-wheel disc ABS and brake assist that work together to enhance safety measures of the vehicle. The emblem maintains its role as brand value representation for various Journey models through design compatibility in all manufacturing generations. Since its inception Dodge Journey has displayed numerous emblem designs that perfectly match the modern look of the automobile. The Dodge model stands out in its market segment due to its special features including the 2011 upgrade of infotainment systems. Customers continue to hold strong attachments to the car and its emblem following its 2020 discontinuation because the vehicle maintained an unbeatable balance between comfort and safety and affordability. The car Emblem functions as more than a logo since it represents the long-lasting influence of the automaker as a manufacturer.

Dodge Journey Emblem Parts and Q&A

Emblem, Front
5155674AA
Q: How to Detach the Exterior Emblem on Dodge Journey?
A:
Place masking tape along the body of the car, running next to the top edge of the nameplate. If it's cooler than 21°C (70°F), put the emblem under a heat lamp or heat gun, but don't let the temperature rise above 52°C (120°F). After that, place a plastic trim stick or hard wood wedge behind the emblem to remove the adhesive from the body. At the end, scrub any adhesive off the body with Mopar® Super Kleen solvent or a similar cleaner.
Emblem, Rear
5155658AA
Q: How to Install an Emblem on the Body on Dodge Journey?
A:
Before attaching the body emblem, take the carrier off the adhesive tape found on its backside. Then, correctly place the emblem on the body and press down with your palm. If it's below 21°C (70°F) in the area, heat the emblem using a heat lamp or gun to avoid any issues with adhesion, but do not let the temperature go over 52°C (125°F).