How to Install the Hood Cable on Dodge Journey?

Make sure to direct the cable (4) through the hole under the dash panel, then up the inner frame. Then, set the rubber grommet onto the lower dash panel and place the hood cable into its push-in fastener (3). Insert the screws into the cowl panel to fasten the hood cable handle (1) and tighten them to 1.8 Nm or 16 in. lbs. You should then set up the left front cowl trim panel and attach the hood cable into the clips (2) on the inner frame rail. In the end, attach the hood latch.

OEM Dodge Journey Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

View related parts
Dodge Journey Release Cable, Front Part Number: 5155803AF
$54.66 MSRP: $80.00
You Save: $25.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
- Replaces: 5155803AB, 5155803AE, 5155803AD, 5155803AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

Dodge Journey Hood Cable

Choose OEM Hood Cable that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Hood Cable follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Journey Hood Cable functions as an important element which demonstrates both the dependability and operational performance of Dodge Journey vehicles. Through this cable the hood release lever enables drivers to easily reach the hood latch mechanism to inspect the engine compartment. This hood cable from Dodge Journey proves durable because it has been engineered to operate smoothly even through regular abuse. A wide selection of Dodge Journey models can benefit from this part because it plays an essential safety function while maintaining vehicle efficiency. A hood cable failure creates problems with hood operation thus blocking essential engine components from reaching a technician. The successful operation of the Dodge Journey Hood Cable depends heavily on scheduled maintenance because any damage to the cable through cracking creates both water penetration and shortened lifespan. The car garners recognition from customers because of its roomy interior and sophisticated safety design features with the hood cable operating reliably to strengthen vehicle safety. The car Hood Cable stands out because of its strong durability and simple installation capability among automotive market choices. The Hood Cable for Dodge Journey supports both better vehicle operational functionality and solidifies the car's identity as a dependable safe automobile which makes it an imperative element for the automaker model users.

Dodge Journey Hood Cable Parts and Q&A

Release Cable, Front
5155803AF
Q: How to Install the Hood Cable on Dodge Journey?
A:
Make sure to direct the cable (4) through the hole under the dash panel, then up the inner frame. Then, set the rubber grommet onto the lower dash panel and place the hood cable into its push-in fastener (3). Insert the screws into the cowl panel to fasten the hood cable handle (1) and tighten them to 1.8 Nm or 16 in. lbs. You should then set up the left front cowl trim panel and attach the hood cable into the clips (2) on the inner frame rail. In the end, attach the Hood Latch.