How to Service the Tail Light Unit on Dodge Magnum?

You should disconnect the negative terminal from the battery as your first step before working on the tail lamp unit. Unscrew the two fasteners in the liftgate opening and from inside the cargo area, poke under the rear of the quarter trim panel with a trim stick to lift the access panel. Then, remove the single plastic wing nut and draw back on the mount to pop the tabs supporting the rear tail light assembly. Twist and pull the electrical connector from the tail lamp unit, then spin it counterclockwise to remove the Stop, Turn Signal or back up lamp. Here, you attach the connector to the tail lamp unit, fit the unit in the opening in the quarter panel and press it in to sit the indexing pins. Place the plastic wing nut and install the two push pin fasteners in the liftgate opening and after that you can fix the battery to the negative cable.

How to Maintain a Tail Light on Dodge Magnum?

Disconnect and isolate the negative battery cable at the beginning of tail lamp servicing. Remove both push fasteners inside the liftgate, then, from the interior, lift the panel at the rear of the quarter trim with a trim stick. Remove the one plastic wing nut and then slide the tail lamp assembly rearward to unlatch the mounting tabs. You should remove the lamp units by disconnecting the electrical plug after twisting them counterclockwise. When installing, place the electrical connector onto the tail lamp unit, set the unit in the gap for the quarter panel and move it forward until the indexing pins are seated. Install and tighten the wing nut, then insert the push pin fasteners into the liftgate holes. After that, attach the battery's negative cable back.

OEM Dodge Magnum Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Tail Lights found

View related parts
Dodge Magnum Cargo Lamp, Rear Part Number: 4685928AA
$65.39 MSRP: $97.80
You Save: $32.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp - Liftgate; Cargo Area Light, Rear; Courtesy Light, Rear; Trunk Lamp; Lamp Liftgate
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Tail Lamp Assembly, Rear Driver Side Part Number: 4805967AE
$112.34 MSRP: $166.00
You Save: $53.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Left; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light
- Position: Rear Driver Side
- Replaces: 4805967AD, 4805967AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | R/T, SE, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Tail Lamp Assembly, Rear Driver Side Part Number: 4805967AH
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Left; Back Up Light; Tail Lamps; Lamp Tail Stop Turn; Tail Light Assembly; Tail Light
- Position: Rear Driver Side
- Replaces: 4805967AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Tail Lamp Assembly, Rear Passenger Side Part Number: 4805966AE
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Right; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light
- Position: Rear Passenger Side
- Replaces: 4805966AC, 4805966AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | R/T, SE, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Tail Lamp Assembly, Rear Passenger Side Part Number: 4805966AH
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Rear Right; Tail Lamp -Passenger Side; Back Up Light; Stop Light; Tail Lamps; Lamp Tail Stop Turn; Tail Light Assembly; Tail Light
- Position: Rear Passenger Side
- Replaces: 4805966AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Magnum Tail Light

Choose OEM Tail Light that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Tail Light follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Tail Light is an essential part that combines reliability and performance that not only gives safety to the Dodge Magnum vehicles but also something that would increase the productivity of the automobiles. Despite this, Tail Light has a very well-built structure and it offers a clear vision at night and clearly conveys to other motorists that one is stopping or turning, thus minimizing on the occurrence of accidents. Designed to fit the following Magnum models; rear-wheel-drive station wagon models between 2005 and 2008, the Tail Light is built to offer maximum safety conforming with the latest safety standards which delivers an unique chic that enhances on the looks of the car. The options for the type of tail light have also been upgraded to advanced levels, including the use of LED options, which, not only brighten the automobile but also conserve energy making it one of the most popular in the automotive industry. The Tail Light has basic components such as rear position lamps and stop lamps; therefore, the drivers are visible to others on the road, and they convey their intentions effectively. In the same respect, the styling of the Tail Light has been made versatile and has variety in style due to the consideration of Magnum lovers. In general, the Tail Light is not only a safety component; it is an emblem of the great history of Dodge, a part that provides functionality and style to each car in Dodge Magnum line.

Dodge Magnum Tail Light Parts and Q&A

Cargo Lamp, Rear
4685928AA
Q: How to Service the Tail Light Unit on Dodge Magnum?
A:
You should disconnect the negative terminal from the battery as your first step before working on the tail lamp unit. Unscrew the two fasteners in the liftgate opening and from inside the cargo area, poke under the rear of the quarter trim panel with a trim stick to lift the access panel. Then, remove the single plastic wing nut and draw back on the mount to pop the tabs supporting the rear tail light assembly. Twist and pull the electrical connector from the tail lamp unit, then spin it counterclockwise to remove the Stop, Turn Signal or back up lamp. Here, you attach the connector to the tail lamp unit, fit the unit in the opening in the quarter panel and press it in to sit the indexing pins. Place the plastic wing nut and install the two push pin fasteners in the liftgate opening and after that you can fix the battery to the negative cable.
Tail Lamp Assembly, Rear Driver Side
4805967AE
Q: How to Maintain a Tail Light on Dodge Magnum?
A:
Disconnect and isolate the negative Battery Cable at the beginning of tail lamp servicing. Remove both push fasteners inside the liftgate, then, from the interior, lift the panel at the rear of the quarter trim with a trim stick. Remove the one plastic wing nut and then slide the tail lamp assembly rearward to unlatch the mounting tabs. You should remove the lamp units by disconnecting the electrical plug after twisting them counterclockwise. When installing, place the electrical connector onto the tail lamp unit, set the unit in the gap for the quarter panel and move it forward until the indexing pins are seated. Install and tighten the wing nut, then insert the push pin fasteners into the liftgate holes. After that, attach the battery's negative cable back.