How to install a pilot bearing on Dodge Nitro?

Before installation, rub high temperature grease into the pilot bearing. Turn the new pilot bearing (1) into the crankshaft by hand and after that, align the bearing with the tool (2). After everything is secure, then place the clutch disc, clutch pressure plate and lastly, set in the transmission.

OEM Dodge Nitro Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pilot Bearing found

View related parts
Dodge Nitro Pilot Bearing Part Number: 53009180AB
$32.31 MSRP: $42.00
You Save: $9.69 (24%)
ADD TO CART
Product Specifications
- Other Name: Sleeve - Pilot; Multi-Purpose Bearing; Needle Bearing; Pilot Bearings; Bearing Pilot For 2.5 Engine, Serviced In Flywheel; Bearing Pilot Manual Transmission; Bearing Pilot
- Replaces: 53009180
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Nitro | R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Pilot Bearing

Choose OEM Pilot Bearing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Pilot Bearing follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Nitro Pilot Bearing Parts and Q&A

Pilot Bearing
53009180AB
Q: How to install a pilot bearing on Dodge Nitro?
A:
Before installation, rub high temperature grease into the pilot bearing. Turn the new pilot bearing (1) into the Crankshaft by hand and after that, align the bearing with the tool (2). After everything is secure, then place the clutch disc, clutch pressure plate and lastly, set in the transmission.