How to Remove and Service a Wheel Speed Sensor on Dodge Nitro?

To start working on your wheel speed sensor, first lift the vehicle and support it, then take off the wheel and tire assembly. Next, remove the caliper adapter to keep the brake caliper securely held up, so no damage occurs to the hose. Afterward, take out the disc brake rotor and the wheel speed sensor bolt (2) from the hub (3). Take out the wheel speed sensor wire (1) from inside the bearing, pass it through the brake shield and release the wire's hold down clips. At the end, pull the locking connector from the sensor connector and take out the wheel speed sensor from the vehicle.

How to Install a Speed Sensor on a Wheel on Dodge Nitro?

Put the wheel speed sensor through the support plate and tighten the wheel speed sensor bolt (2) to 9 Nm (80 in. lbs.). Support the sensor wire with the routing clips, seeing that it's held in place and not interfering with anything that rotates. Connect the ends of the wheel speed sensor harness (1) and make sure the tab holding the connector is properly engaged as you slowly lower the vehicle.

OEM Dodge Nitro Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
Dodge Nitro Speed Sensor, Rear Part Number: 52125003AD
$81.79 MSRP: $123.00
You Save: $41.21 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Sensor; Rear Speed Sensor; Sensor Wheel Speed Rear; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 52125003AC, 52125003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro ABS Sensor, Front Part Number: 68004019AE
$28.21 MSRP: $60.80
You Save: $32.59 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Front; Anti-Lock Braking System Sensor; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Front
- Replaces: 68004019AC, 68004019AA, 68004019AD, 68004019AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Speed Sensor

Choose OEM Speed Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Speed Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Nitro Speed Sensor is one of the components that helps in boosting the performance and safety of the Dodge Nitro vehicles. Being highly dependability, this Speed Sensor provides relevant info on the vehicle speed and wheels' rotation and sends the necessary data to the engine control unit and anti-locking braking system. This functionality is crucial in order to achieve maximum efficiency in operation of the engine as well as the adequacy of brake systems, which in turn makes a contribution to the effectiveness of the car and its performance. The Speed Sensor can be installed for many Dodge Nitro models manufactured from 2007 up to 2012 and is intended to be used with the Nitro's powerful 3.7 Magnum V6 engine and its sophisticated transmission. The Dodge Nitro Speed Sensor implements such elements as ferromagnetic reluctor rings and passive/active sensors that allow achieving high resolutions of speed measurement in different environments. The latter is paramount for some features, such as the traction control or the protection of the wheels against slippage, thus the Dodge Nitro should appeal to the customers who want a car with lots of performance and trace elements of safety. Also, the Dodge Nitro Speed Sensor is unique in the automotive marketplace because it is designed to last and have extremely stable signal quality over lengthy periods of time. All in all, the Dodge Nitro Speed Sensor is an essential component of the Nitro's structure, providing a continuation of the car's branding for force and reliability in addition to improving the efficiency of the car.

Dodge Nitro Speed Sensor Parts and Q&A

Speed Sensor, Rear
52125003AD
Q: How to Remove and Service a Wheel Speed Sensor on Dodge Nitro?
A:
To start working on your wheel speed sensor, first lift the vehicle and support it, then take off the wheel and tire assembly. Next, remove the caliper adapter to keep the Brake Caliper securely held up, so no damage occurs to the hose. Afterward, take out the disc brake rotor and the wheel speed sensor bolt (2) from the hub (3). Take out the wheel speed sensor wire (1) from inside the bearing, pass it through the brake shield and release the wire's hold down clips. At the end, pull the locking connector from the sensor connector and take out the wheel speed sensor from the vehicle.
ABS Sensor, Front
68004019AE
Q: How to Install a Speed Sensor on a Wheel on Dodge Nitro?
A:
Put the wheel speed sensor through the support plate and tighten the wheel speed sensor bolt (2) to 9 Nm (80 in. lbs.). Support the sensor wire with the routing clips, seeing that it's held in place and not interfering with anything that rotates. Connect the ends of the wheel speed sensor harness (1) and make sure the tab holding the connector is properly engaged as you slowly lower the vehicle.