How to Maintain and Repair Cup Holders on Dodge Ram 1500?

Make sure the air bag system is disabled, the battery negative (ground) cable is disconnected and isolated and then let the air bag system capacitor discharge for two minutes before you start service or repair of any cup holders. Then, lift up the bezel in the center and after that move on to lift the covers of the air bag control module. Reach into the cup holder, pull down the panel and undo the two screws inside it. After that, take out the cup holder by removing the last four screws. To fit the cup holder, first hold it in place and screw it down from the outside and then attach the two lower screws inside. Next, unfold the inner cover and add the two screws found inside. Later, add the center bezel and the air bag control module trim cover.

How to Maintain a Cup Holder on Dodge Ram 1500?

Before you work on the cup holder, cut the ground cable from the battery and wait for two minutes to let the air bag capacitor empty. Open your hood and remove the center bezel, as well as the air bag control module trim cover. Pull the cup holder open, then unfold the inner panel and take out the two inside screws and then the other four screws to remove the cup holder. For installation, put the cup holder back in its spot and attach it to the car using the two screws up top, then add the lower two screws. Opened.

OEM Dodge Ram 1500 Cup Holder

Drink Holder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Cup Holders found

View related parts
Dodge Ram 1500 Cup Holder, Front Part Number: 1LD23XXXAA
$63.79 MSRP: $93.90
You Save: $30.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder; Seat Armrest Cup Holder, Front
- Position: Front
- Replaces: 1LD23TX7AA, 1LD23DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 5HD65DX9AC
$64.58 MSRP: $95.00
You Save: $30.42 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder; Console Cup Holder; End Cap Delete Rear, Floor Cup Holder; Cupholder Rear, Floor Cup Holder; End Cap Delete
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Gray Part Number: 5GT151DVAE
$487.77 MSRP: $712.00
You Save: $224.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder; Console Cup Holder; Cupholder Instrument Panel
- Replaces: 5GT151DVAC, 5GT151DVAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Taupe Part Number: 5GT151L5AE
$111.76 MSRP: $142.00
You Save: $30.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder; Console Cup Holder; Cupholder Instrument Panel
- Replaces: 5GT151L5AC, 5GT151L5AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 55115831
Product Specifications
- Other Name: Holder - Instrument Panel; Holder Cup
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 1500 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Gray/Taupe Part Number: 5JU311DHAC
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder; Console Cup Holder; Cupholder Instrument Panel
- Replaces: 5JU311DHAB, 5JU311DHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Liner, Front Part Number: 5KK92DX9AB
Product Specifications
- Other Name: Console Mounted; Console Mat, Front Lower; Console Compartment; Console Mat, Front; Lining; Cupholder Console Mounted; Liner Cup Holder
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 5FR421K9AD
$142.76 MSRP: $210.00
You Save: $67.24 (33%)
Product Specifications
- Other Name: Cupholder - Instrument Panel; Cupholder Instrument Panel
- Replaces: 5FR421K9AC, 5FR421K9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 5FR421AZAD
$147.29 MSRP: $217.00
You Save: $69.71 (33%)
Product Specifications
- Other Name: Cupholder - Instrument Panel; Cupholder Instrument Panel
- Replaces: 5FR421AZAB, 5FR421AZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 5EZ53LAZ
Product Specifications
- Other Name: Cupholder; Cupholder Console
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Liner, Front Part Number: 5175622AA
Product Specifications
- Other Name: Liner - Cup Holder; Console Mat, Front Rearward; Lining; Liner Cup Holder
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Liner Part Number: 5183313AA
Product Specifications
- Other Name: Liner - Cup Holder; Liner Cup Holder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SXT | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Beige Part Number: 1PA20DK2AB
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder
- Replaces: 1PA20DK2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Gray Part Number: 1PA20XDVAB
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder
- Replaces: 1PA20XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Blue Part Number: 5GT151QLAE
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder; Console Cup Holder
- Replaces: 5GT151QLAC, 5GT151QLAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Dodge Ram 1500 | Laramie, SLT, ST | 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 5FR421C8AD
Product Specifications
- Other Name: Cupholder - Instrument Panel; Cupholder Instrument Panel
- Replaces: 5FR421C8AB, 5FR421C8AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Cup Holder Part Number: 5JU311J8AC
Product Specifications
- Other Name: Holder - Instrument Panel; Instrument Panel Cup Holder; Console Cup Holder; Cupholder Instrument Panel
- Replaces: 5JU311J8AB, 5JU311J8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Cup Holder, Gray Part Number: 1EA971DVAB
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder
- Replaces: 1EA971DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Cup Holder, Beige Part Number: 1EA971K2AB
Product Specifications
- Other Name: Cupholder - Instrument Panel; Instrument Panel Cup Holder
- Replaces: 1EA971K2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS

Dodge Ram 1500 Cup Holder

Choose OEM Cup Holder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Cup Holder follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 1500 Cup Holder can be described as a part that plays a crucial role in a driver's day to day activities and more so during the rough terrains. The Dodge Ram 1500 Cup Holder is famous for its high performance and sturdiness; besides, the provision of its usage, the Cup Holder can fit a large cup and more; It has got spring-loaded systems that would hold the cups firmly. This design is endowed with certain elements intended for both the driver and the passengers, which makes this detail indispensable for the Dodge Ram 1500. Designed to fit most Ram 1500 models, the Cup Holder is placed in several positions, the driver side, the passenger side and the rear, reducing interference thereby reducing distraction while driving. Dodge Ram 1500 is famous for its build quality and utility and this Cup Holder contributes to uphold it. Given this, the Dodge Ram 1500 Cup holder fits in the automotive market because it enables occupants to hold their favorite beverages without the compromise of comfort or safety. They are even able to adjust to larger "car cups", and this adds to the versatility of the cup-holder; particularly for people on the move. All in all, the Dodge Ram 1500 Cup Holder is a perfectly constructed addition to the vehicle that proves the brands dedication to a quality and functional product, which helps enhance the user's experience in their Dodge Ram 1500.

Dodge Ram 1500 Cup Holder Parts and Q&A

Cup Holder, Gray
5GT151DVAE
Q: How to Maintain and Repair Cup Holders on Dodge Ram 1500?
A:
Make sure the air bag system is disabled, the battery negative (ground) cable is disconnected and isolated and then let the air bag system capacitor discharge for two minutes before you start service or repair of any cup holders. Then, lift up the bezel in the center and after that move on to lift the covers of the air bag control module. Reach into the cup holder, pull down the panel and undo the two screws inside it. After that, take out the cup holder by removing the last four screws. To fit the cup holder, first hold it in place and screw it down from the outside and then attach the two lower screws inside. Next, unfold the inner cover and add the two screws found inside. Later, add the center bezel and the air bag control module trim cover.
Cup Holder
5EZ53LAZ
Q: How to Maintain a Cup Holder on Dodge Ram 1500?
A:
Before you work on the cup holder, cut the ground cable from the battery and wait for two minutes to let the air bag capacitor empty. Open your hood and remove the center bezel, as well as the air bag control module trim cover. Pull the cup holder open, then unfold the inner panel and take out the two inside screws and then the other four screws to remove the cup holder. For installation, put the cup holder back in its spot and attach it to the car using the two screws up top, then add the lower two screws. Opened.