How to Install a Vacuum Brake Booster on Dodge Ram 2500?

First, fit the booster studs into the holes in the cowl panel and then put the booster onto the panel. Following this, put in and tighten the bolts that secure the booster to 28 Nm (250 in. lbs.). After that, fit the booster push rod guide on the brake pedal and hold it in place with a clip. If your booster check valve wasn't originally installed, fit it and connect the vacuum hose to the check valve. Finish by putting in the master cylinder and run the procedure to fill and bleed the brake system.

How to Remove and Replace a Brake Booster on Dodge Ram 2500?

Make sure to flush the power steering system before you take out and replace the hydraulic brake system if contaminated power steering fluid is the reason. First, stop the engine and pump the brake pedal down five times to drain the accumulator. Then, separate the brake lines from the master cylinder, then undo the nuts holding it in place and finally pull the master cylinder out. Then, remove the return hose and the two pressure lines from the hydraulic booster. Once you're inside the car, remove the booster push rod clip, washer and rod from underneath the brake pedal. After that, disconnect the mounting nuts from the hydraulic booster and then take the booster out.

OEM Dodge Ram 2500 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Boosters found

View related parts
Dodge Ram 2500 Brake Booster Part Number: 5179891AC
$825.55 MSRP: $1225.00
You Save: $399.45 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Hydro-Boost Assembly; Booster Assembly; Booster
- Replaces: 5179891AA, 5093406AB, 5179891AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 68049853AA
$288.92 MSRP: $430.00
You Save: $141.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 5102068AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster; Booster Assembly; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 68031901AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Power Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 5017033AA
Product Specifications
- Other Name: Booster - Power Brake; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 5015103AA
Product Specifications
- Other Name: Booster - Power Brake; Power Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 5015102AA
Product Specifications
- Other Name: Booster; Power Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 4746380
Product Specifications
- Other Name: Booster A 260 T; Power Booster; Booster, Brake (260T)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 4746379
Product Specifications
- Other Name: Booster A-260 T; Booster, Brake (260T); Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Brake Booster Part Number: 5003330AC
Product Specifications
- Other Name: Booster - Power Brake; Hydro - Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 2500 | Base | 6 Cyl 5.9 L DIESEL

Dodge Ram 2500 Brake Booster

Choose OEM Brake Booster that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Booster follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Booster is incorporated in Dodge Ram 2500 models so as to build up the braking capacity and lessen the force required by the driver. Located between the brake pedal and master cylinder in the car's system, it is capable of either a vacuum or hydraulic power-assisted boosters to increase force when applying the brake. Some cars use vacuum operated boosters that capture the pressure difference between the vacuum made by the engine and the normal atmospheric pressure and hydraulic boosters include fluid pressure from the power steering pump or an electric assembly. Brake booster at Dodge Ram 2500 has evolved over the years with the company using different types, such as the single and the dual diaphragm of varying diameter and with varying levels of assists. In general, greater diameter boosters have more power aid and while twin diaphragm boosters may produce certain degree of aid, they are more suitable for engines with limited space. It is critical to make correct decision at Brake Booster for further improving by disc bumpers or drum supporters that the Dodge Ram 2500 will not lose effective and responsive braking functions.

Dodge Ram 2500 Brake Booster Parts and Q&A

Brake Booster
5102068AB
Q: How to Install a Vacuum Brake Booster on Dodge Ram 2500?
A:
First, fit the booster studs into the holes in the cowl panel and then put the booster onto the panel. Following this, put in and tighten the bolts that secure the booster to 28 Nm (250 in. lbs.). After that, fit the booster push rod guide on the brake pedal and hold it in place with a clip. If your booster check valve wasn't originally installed, fit it and connect the vacuum hose to the check valve. Finish by putting in the master cylinder and run the procedure to fill and bleed the brake system.
Brake Booster
5179891AC
Q: How to Remove and Replace a Brake Booster on Dodge Ram 2500?
A:
Make sure to flush the power steering system before you take out and replace the hydraulic brake system if contaminated power steering fluid is the reason. First, stop the engine and pump the brake pedal down five times to drain the accumulator. Then, separate the Brake Lines from the master cylinder, then undo the nuts holding it in place and finally pull the master cylinder out. Then, remove the return hose and the two pressure lines from the hydraulic booster. Once you're inside the car, remove the booster push rod clip, washer and rod from underneath the brake pedal. After that, disconnect the mounting nuts from the hydraulic booster and then take the booster out.