How to Remove a Brake Master Cylinder on Dodge Ram 2500?

First, put the prop rod on the brake pedal to keep pressure in the brake system. After that, take off the reservoir cap (1) and siphon out the fluid into a container used for draining. Remove the electrical connection from the fluid level switch (3) which is found inside the reservoir (2). After that, loosen the reservoir mounting bolt (5) and lift the reservoir (2) up to unhook it from the master cylinder (4). Afterward, remove the old grommets that were in the cylinder body.

How to install a Brake Master Cylinder on Dodge Ram 2500?

Installing the Brake Master Cylinder requires you to first insert the new greased grommets 6; put small amounts of clean brake fluid on them and finger press the cylinder to avoid damaging the grommets. Now, connect reservoir 2 into the drainage grommets 6 and make sure to keep it rocking and pressed down as you do so. When that's done, fasten mounting bolt 5 on the reservoir 2 to the master cylinder 4 and plug the electrical connector back into the level switch 3. At the end, take out the prop rod and fill and bleed the base brake system.

OEM Dodge Ram 2500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Master Cylinders found

View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5011256AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5093408AA
Product Specifications
- Other Name: Motor Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 4778456
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder, Brake; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5179892AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: V1100888AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5093407AA
Product Specifications
- Other Name: Motor Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 2500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5017034AA
Product Specifications
- Other Name: Motor Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5093407AB
Product Specifications
- Other Name: Motor Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 2500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 4778450
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder, Brake; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Master Cylinder Part Number: 5080888AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

Dodge Ram 2500 Brake Master Cylinder

Choose OEM Brake Master Cylinder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Master Cylinder follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Master Cylinder is installed in the Dodge Ram 2500 vehicles and offers the pressure applied by the foot by means of hydraulic force in order to control the brakes. This is done through the pistons which are housed in cast iron or aluminum and pressurize the brake fluid which then force the slave cylinders to engage the brake calipers or drums for the formation of a friction needed to stop the car. Over the years models of Dodge Ram 2500 have incorporated the use of dual circuit master cylinders having two pistons for safety measures in the case of hydraulic failure since 1967. The design can, therefore, combine the integral reservoir or the separate one, although, the latter is more popular. These may vary mainly in terms of reservoir constructing and the method of attachment used. This is because problems such as fluid leakage or moisture or any factor that will reduce the efficiency of the Brake Master Cylinder affects the efficiency of the Dodge Ram 2500 vehicles hence, the need to seek for servicing immediately.

Dodge Ram 2500 Brake Master Cylinder Parts and Q&A

Master Cylinder
5093408AA
Q: How to Remove a Brake Master Cylinder on Dodge Ram 2500?
A:
First, put the prop rod on the brake pedal to keep pressure in the brake system. After that, take off the reservoir cap (1) and siphon out the fluid into a container used for draining. Remove the electrical connection from the fluid level switch (3) which is found inside the reservoir (2). After that, loosen the reservoir mounting bolt (5) and lift the reservoir (2) up to unhook it from the master cylinder (4). Afterward, remove the old grommets that were in the cylinder body.
Master Cylinder
5179892AA
Q: How to install a Brake Master Cylinder on Dodge Ram 2500?
A:
Installing the Brake Master Cylinder requires you to first insert the new greased grommets 6; put small amounts of clean brake fluid on them and finger press the cylinder to avoid damaging the grommets. Now, connect reservoir 2 into the drainage grommets 6 and make sure to keep it rocking and pressed down as you do so. When that's done, fasten mounting bolt 5 on the reservoir 2 to the master cylinder 4 and plug the electrical connector back into the level switch 3. At the end, take out the prop rod and fill and bleed the base brake system.