How to remove a wheel cover on Dodge Ram 2500?

Always remove the hub caps before raising the vehicle to take off the cover. First, insert the flat end of the hub/cap remover/installer directly into the opening you made and gently rock it to loosen the wheel skin. Continue this step all around the tire until the wheel pops off. For 2500/3500 single rear wheel models, pull the cap up and off by inserting the tool's blade and moving it back and forth. Cap removal is easier with dual wheels because you insert the tool in the opening and pull outward to take off the hub cap. Keeping your hand moving on the skin will stop it from losing its chrome finish. After removing the hub caps, hold the flat end of the lug nut wrench against a wheel skin and rock it side to side to pry it off. The hub cap remover or installer should be used like a key for the front hub caps on 3500 vehicles, taking care of them before you remove the wheel skins.

How to install front and rear wheel covers on Dodge Ram 2500?

Line up the valve stem with the notch on the wheel skin, then put one side of the wire retainer for the wheel cover onto the wheel's face. After you lay the wheel skin on the opposite side, use a rubber mallet to press it against the wheel, making sure there is the same gap all around the skin/cap. Pull on the hub cap to see if it fits well and is properly installed. On the rear inner wheel, attach one 1 1/2 inch valve stem extension on each wheel and then use a 3/8 in. drive 10mm deep wheel socket to remove the current stem cap and install your valve stem extension. After that, slide a 1 in. valve stem extension onto the quick-release lever of each outer wheel. Match up the cooling windows on the wheel skin to those on the wheel, then position one side of the wheel skin's retainer onto the wheel, strike the outside of the wheel skin all around using a rubber hammer and make sure to keep a uniform gap between the skin/cap and the wheel. As the final step, pull on the hub/cap wheel skin to confirm everything is in place.

OEM Dodge Ram 2500 Wheel Cover

Wheel Protector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Wheel Covers found

View related parts
Dodge Ram 2500 Center Cap, Rear Part Number: 52106877AD
$380.14 MSRP: $555.00
You Save: $174.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap, Front, Rear; Wheel Center Cap; Hub Cap
- Position: Rear Center
- Replaces: 52106877AB, 52106877AA, 52106877AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Wheel Cover, Center Part Number: 52038267
$51.80 MSRP: $65.66
You Save: $13.86 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Center Cap; Cap Wheel Center; Cap, Wheel
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52121450AD
$200.18 MSRP: $263.00
You Save: $62.82 (24%)
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center Front; Cap Wheel Center Rear; Cap Wheel Center
- Position: Center
- Replaces: 52121450AB, 52121450AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Wheel Cover, Rear Part Number: 52106882AB
$351.52 MSRP: $513.00
You Save: $161.48 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover - Wheel; Wheel Cover, Rear; Wheel Cap, Rear; Wheel Cap; Wheel Center Cap; Hub Cap; Center Cap
- Position: Rear
- Replaces: 52106882AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Center Cap, Front Part Number: 1AB03S4AAC
$161.93 MSRP: $213.00
You Save: $51.07 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap, Front; Wheel Center Cap; Hub Cap
- Position: Front Center
- Replaces: 1AB03S4AAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Center Cap, Rear Part Number: 1AB04S4AAD
$186.42 MSRP: $278.00
You Save: $91.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap, Rear; Wheel Center Cap; Hub Cap
- Position: Rear Center
- Replaces: 1AB04S4AAA, 1AB04S4AAB, 1AB04S4AAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Wheel Cover, Front Part Number: 52106937AC
$292.31 MSRP: $430.00
You Save: $137.69 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Wheel; Wheel Cover, Front; Wheel Cap, Front; Wheel Cap; Wheel Center Cap; Hub Cap; Center Cap
- Position: Front
- Replaces: 52106937AA, 52106937AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Center Cap, Black Part Number: 5DK62DX9AC
$109.87 MSRP: $154.00
You Save: $44.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center Black
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52038915
$86.20 MSRP: $109.27
You Save: $23.07 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Center Cap; Hub Cap; Cap Wheel Center Chrome
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52106876AD
$172.13 MSRP: $226.00
You Save: $53.87 (24%)
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap
- Position: Center
- Replaces: 52106876AB, 52106876AA, 52106876AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: XY18PAKAD
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center Front; Cap Wheel Center Rear; Cap Wheel Center
- Position: Center
- Replaces: XY18PAKAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52039098AB
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52106863AC
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Center Cap; Hub Cap; Cap Wheel Center Chrome With Dual Wheels
- Position: Center
- Replaces: 52038270AB, 52106863AB, 52106863AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52106283AB
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center Chrome
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002, 1994-1999 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52106866AC
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Center Cap; Hub Cap; Cap Wheel Center Chrome With Dual Wheels
- Position: Center
- Replaces: 52038271AB, 52106866AB, 52106866AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap, Black Part Number: 5DK60PX9
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center Black; Cap, Wheel
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Center Cap Part Number: 52013653AA
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center Chrome; Cap Wheel Center
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Wheel Cover

Choose OEM Wheel Cover that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheel Cover follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Wheel Covers for Dodge Ram 2500 models serve as critical elements that improve both performance quality and visual attractiveness of this Dodge Ram 2500 car series. The reliable Wheel Cover shields stamped steel wheels against rust and damage which preserves the durability of mounting studs together with lug nuts. Wheel Covers consist of strong plastic material and install onto wheel rims by spring steel clips or wire retainers or through bolt-on mounting. The Wheel Cover system features universal compatibility to find appropriate solutions for all Dodge Ram 2500 truck models which improves both driving safety and efficiency. The Dodge Ram 2500 Wheel Cover provides customers with multiple size options from 14 to 16 inches for personal thetic customization. Customers should exercise care when driving through rough terrain or curbs because these Wheel Covers stay durable through typical daily driving but require careful handling. The history of Dodge Ram 2500 continues through the Wheel Cover which safeguards its performance reputation. The car part presents itself as a standout market choice due to its functional design which enhances both style and safety efficiency for the vehicle while serving the automaker model owners.

Dodge Ram 2500 Wheel Cover Parts and Q&A

Center Cap
XY18PAKAD
Q: How to remove a wheel cover on Dodge Ram 2500?
A:
Always remove the hub caps before raising the vehicle to take off the cover. First, insert the flat end of the hub/cap remover/installer directly into the opening you made and gently rock it to loosen the wheel skin. Continue this step all around the tire until the wheel pops off. For 2500/3500 single rear wheel models, pull the cap up and off by inserting the tool's blade and moving it back and forth. Cap removal is easier with dual wheels because you insert the tool in the opening and pull outward to take off the hub cap. Keeping your hand moving on the skin will stop it from losing its chrome finish. After removing the hub caps, hold the flat end of the lug nut wrench against a wheel skin and rock it side to side to pry it off. The hub cap remover or installer should be used like a key for the front hub caps on 3500 vehicles, taking care of them before you remove the wheel skins.
Center Cap
52121450AD
Q: How to install front and rear wheel covers on Dodge Ram 2500?
A:
Line up the valve stem with the notch on the wheel skin, then put one side of the wire retainer for the wheel cover onto the wheel's face. After you lay the wheel skin on the opposite side, use a rubber mallet to press it against the wheel, making sure there is the same gap all around the skin/cap. Pull on the hub cap to see if it fits well and is properly installed. On the rear inner wheel, attach one 1 1/2 inch valve stem extension on each wheel and then use a 3/8 in. drive 10mm deep wheel socket to remove the current stem cap and install your valve stem extension. After that, slide a 1 in. valve stem extension onto the quick-release lever of each outer wheel. Match up the cooling windows on the wheel skin to those on the wheel, then position one side of the wheel skin's retainer onto the wheel, strike the outside of the wheel skin all around using a rubber hammer and make sure to keep a uniform gap between the skin/cap and the wheel. As the final step, pull on the hub/cap wheel skin to confirm everything is in place.