For sway bar kit service, you should lift and support the vehicle first. Remove the link nuts, retainers, and grommets from the bottom suspension arm and the bar, then lift out the bar clamps from the rails to get the bar. Join the sway bar to the frame rail, install the clamps and bolts with the bar centered on both sides and tighten the bolts to 54 Nm (40 ft. lbs.). After that, secure the links to the sway bar and lower suspension arm and bolt in the grommets, retainers, and nuts, tightening the nuts to 37 Nm (27 ft. lbs.). Take out the supports and slowly lower the vehicle.