How to Replace a Generator Cartridge Fuse After It Fails on Dodge Ram 3500?

When the generator cartridge fuse is bad, begin by testing the vehicle charging system before you replace the cartridge fuse and put the vehicle back in service. Before removing the generator cartridge fuse, disconnect and remove the negative battery cable, then open and take out the cover of the Power Distribution Center (PDC). Third, unscrew the two screws holding the generator cartridge fuse to the two B(+) terminal stud bus bars in the PDC and take out the fuse. Place the new generator cartridge fuse on the two B(+) terminal stud bus bars in the PDC and fasten the two screws around them to 3.4 Nm or 30 in. lbs. Make sure the screws are torqued correctly and set the cover in place-fastening it to the PDC-before connecting the negative battery cable once more.

OEM Dodge Ram 3500 Fuse

Circuit Fuse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuses found

View related parts
Dodge Ram 3500 Mini Fuse, Yellow, Outer Part Number: ATM20
$2.49 MSRP: $3.70
You Save: $1.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuse - Mini; Multi-Purpose Fuse, Inner, Outer, Rear; Fuse; Fuse Mini 20 Amp, Yellow E - Call; Fuse Mini 20 Amp, Yellow
- Position: Outer
- Replaces: 6101488, 68124785AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
- 1994-1998 Dodge Ram 3500 | 5.9L L6, 5.9L V8, 8.0L V10
View related parts
Dodge Ram 3500 Mini Fuse, Red, Rear Part Number: ATM10
$2.49 MSRP: $3.70
You Save: $1.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuse - Mini; Multi-Purpose Fuse, Inner, Outer, Rear; Fuse; Fuse Mini 10 Amp, Red
- Position: Rear
- Replaces: 68124782AA, 68110976AA, 6101486
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
- 1998 Dodge Ram 3500 | 5.9L L6, 5.9L V8, 8.0L V10
- 1994-1996 Dodge Ram 3500 | 5.9L L6, 5.9L V8, 8.0L V10
View More
View related parts
Dodge Ram 3500 Maxi Fuse, Front Part Number: 4868008AB
$5.28 MSRP: $7.80
You Save: $2.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuse - J Case; Multi-Purpose Fuse, Front, Inner; Battery Fuse; Fuse; Fuse J Case 40 Amp
- Position: Front
- Replaces: 6102077AA, 4868008AA, 68083437AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Maxi Fuse, Inner Part Number: 4868007AB
$5.45 MSRP: $8.05
You Save: $2.60 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuse - J Case; Multi-Purpose Fuse, Front, Inner, Outer; Fuse; Fuse J Case 30 Amp
- Position: Inner
- Replaces: 6102076AA, 4868007AA, 68083436AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Maxi Fuse, Inner Part Number: 4868024AB
$6.55 MSRP: $9.50
You Save: $2.95 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuse - J Case; Multi-Purpose Fuse, Inner; Fuse; Fuse J Case 60 Amp
- Position: Inner
- Replaces: 4868024AA, 68083439AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Circuit Breaker Part Number: 4692143AA
$10.38 MSRP: $15.05
You Save: $4.67 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Breaker - Circuit; Breaker Circuit
- Replaces: 68217078AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Circuit Breaker Part Number: 4604235
$9.86 MSRP: $12.50
You Save: $2.64 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuse - Circuit; Fuse; Circuit Breaker, 20 Amp.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

Dodge Ram 3500 Fuse

Choose OEM Fuse that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuse follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Fuse Parts and Q&A

Circuit Breaker
4604235
Q: How to Replace a Generator Cartridge Fuse After It Fails on Dodge Ram 3500?
A:
When the generator cartridge fuse is bad, begin by testing the vehicle charging system before you replace the cartridge fuse and put the vehicle back in service. Before removing the generator cartridge fuse, disconnect and remove the negative Battery Cable, then open and take out the cover of the Power Distribution Center (PDC). Third, unscrew the two screws holding the generator cartridge fuse to the two B(+) terminal stud bus bars in the PDC and take out the fuse. Place the new generator cartridge fuse on the two B(+) terminal stud bus bars in the PDC and fasten the two screws around them to 3.4 Nm or 30 in. lbs. Make sure the screws are torqued correctly and set the cover in place-fastening it to the PDC-before connecting the negative battery cable once more.