JeepParts
My Garage
My Account
Cart
OEM Dodge Ram 3500 Van Battery Tray
Battery Box- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Battery Tray found
Dodge Ram 3500 Van Battery Tray Part Number: 5161309AA
$24.40 MSRP: $35.85You Save: $11.45 (32%)Ships in 1-3 Business Days
Dodge Ram 3500 Van Battery Tray
Choose OEM Battery Tray that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Battery Tray follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 Van matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 Van parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Dodge Ram 3500 Van Battery Tray Parts and Q&A
- Q: How to service and repair the battery tray on Dodge Ram 3500 Van?A:When servicing or repairing the battery tray, first take out the battery and the battery temperature sensor. Remove the two screws that hold the battery tray to the bottom, take out the screws from the rear that secured the tray to the dash panel support and remove the screws from the outboard side that fastened it to the left cowl side panel. ElIminspecana and slip the battery tray and formed drain tube out together, then unbolt the extra nuts keeping the inner panel connected with the battery tray support and take out the tray support. To install, first clean and check the battery tray, then fit the battery tray support to the weld studs and hold it in place by tightening the two nuts to 22.6 Nm (200 in. lbs.). Lift the battery try onto the support and insert two screws in its outboard side, making sure they are tightened to 11.8 Nm (105 in. lbs.). Then insert two screws at the rear into the dash panel support bracket and secure them with 10.7 Nm (95 in. lbs.); lastly, insert two screws from the bottom into the tray support and tighten them to the same torque. Run the drain tube from the tray to the front of the left wheelhouse using the mounting hole and press the top of the tube into the tray. After that, stick the battery temperature sensor onto the battery tray and place the battery where it belongs.
