How to Remove the ABS Control Module on Dodge Sprinter 2500?

The first step is to disconnect the negative battery cable that is connected to the accelerator post before removing the Electronic Brake Control Module. After that, tug on the ABM harness connector release to remove the connector. After that, take out the ABM screws and part the ABM and HCU with about 38 mm (1.5 in.) gap in between them to make sure you don't break the pressure sensor or Pump Motor connections which could result in needing to repair or replace the HCU. Don't touch the sensor terminals on the HCU side or the contact pads on the ABM side to avoid making the card dirty. Should you put in a new ABM module, it needs to be reprogrammed with a correct scan tool.

How to Install the ABS Control Module on Dodge Sprinter 2500?

The Electronic Brake Control Module must be installed so the ABM is at least 38 mm (1.5 in.) removed from the HCU before removal to avoid damaging the pressure sensor or Pump Motor and possibly requiring a new HCU. Don't touch the sensor terminals on the HCU or the contact pads on the ABM to avoid contamination. Whenever the ABS system is being changed, a scan tool is required to reprogram the ABM. The first step is to fix the ABM onto the HCU using the included mounting screws and then fasten the screws to 2 Nm (16 in. lbs.). After that, connect the wiring harness to the ABM and push it down to secure it. After that, connect the battery's negative cable to the post close to the accelerator and see if the function test with a scan tool is successful.

OEM Dodge Sprinter 2500 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 ABS Control Modules found

View related parts
Dodge Sprinter 2500 Modulator Valve Part Number: 5127538AA
$2156.43 MSRP: $3465.00
You Save: $1308.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake See Note; Control Unit Anti-Lock Brake
- Replaces: 5129374AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | 2.7L L5
View related parts
Dodge Sprinter 2500 Control Module Part Number: 5134262AA
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes See Note
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Control Module Part Number: 68013572AA
Product Specifications
- Other Name: Module - Electronic Stability; ABS Control Module; Modulator Valve; Module Anti-Lock Brakes
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Control Module Part Number: 5161052AA
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes See Note
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Modulator Valve Part Number: 5161051AA
Product Specifications
- Other Name: Module - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake See Note
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Control Module Part Number: 5133700AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module; Module Anti-Lock Brakes See Note; Module Anti-Lock Brake System; Module Anti-Lock Brakes
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Modulator Valve Part Number: 5140695AB
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake See Note
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Control Module Part Number: 68050601AA
Product Specifications
- Other Name: Module - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit
- Replaces: 68050062AA, 68026562AA, 68013570AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 ABS Control Module

Choose OEM ABS Control Module that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each ABS Control Module follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 2500 ABS Control Module is important and plays the role of improving the reliability of the Dodge Sprinter 2500 series. Consistently in demand due to its durability, this SPEC Genuine ABS Control Module provides an especially vital service in instances where there is a strong chance of wheel lockage due to aggressive braking, in effectively moderating said occurrence and thus providing a general safety function for the vehicle. As it interfaces with wheel speed sensors, valves as well as a pump, the ABS Control Module can further regulate the level of brake force with real time information and enables characters like threshold and cadence braking. The diesel engine becomes particularly useful on the Dodge Sprinter 2500 which is offered in several variations including the VAN, CHASSIS CAB and MINIBUS for multiple business uses. As well, a number of the latest ABS Control Modules consist of the electronic stability control which helps in improving the direction of the vehicle during slide and improves the traction control by handling the force of brake and accelerator. The Dodge Sprinter 2500 ABS Control Module serves as the go-to brake control device that enhances brake performance and also makes a significant input on the overall efficiency and safety of the vehicle to make it stand out in the market. Being a reliable vehicle, the Dodge Sprinter 2500's ABS Control Module should be a necessity for drivers who rely on the vehicle for their business ventures to transport goods to different places with diverse road conditions.

Dodge Sprinter 2500 ABS Control Module Parts and Q&A

Control Module
68013572AA
Q: How to Remove the ABS Control Module on Dodge Sprinter 2500?
A:
The first step is to disconnect the negative Battery Cable that is connected to the accelerator post before removing the Electronic Brake Control Module. After that, tug on the ABM harness connector release to remove the connector. After that, take out the ABM screws and part the ABM and HCU with about 38 mm (1.5 in.) gap in between them to make sure you don't break the pressure sensor or Pump Motor connections which could result in needing to repair or replace the HCU. Don't touch the sensor terminals on the HCU side or the contact pads on the ABM side to avoid making the card dirty. Should you put in a new ABM module, it needs to be reprogrammed with a correct scan tool.
Control Module
68050601AA
Q: How to Install the ABS Control Module on Dodge Sprinter 2500?
A:
The Electronic Brake Control Module must be installed so the ABM is at least 38 mm (1.5 in.) removed from the HCU before removal to avoid damaging the pressure sensor or Pump Motor and possibly requiring a new HCU. Don't touch the sensor terminals on the HCU or the contact pads on the ABM to avoid contamination. Whenever the ABS system is being changed, a scan tool is required to reprogram the ABM. The first step is to fix the ABM onto the HCU using the included mounting screws and then fasten the screws to 2 Nm (16 in. lbs.). After that, connect the wiring harness to the ABM and push it down to secure it. After that, connect the battery's negative cable to the post close to the accelerator and see if the function test with a scan tool is successful.