OEM Dodge Sprinter 2500 Car Speakers

Dodge Sprinter 2500 Car Speakers Parts and Q&A

• Front Driver Speaker
  68010059AA
  Q: How to Install Car Speakers and Their Components on Dodge Sprinter 2500?

  A:

  Start by joining the electrical connector, setting up the center front speaker, tightening the mounting fasteners and finally putting on the speaker cover, before you connect the negative battery cable. First, connect the powered connector, put in the midrange speaker, secure it with mounting fasteners, add the door trim panel after that and lastly, connect the negative battery cable. Getting the front door tweeters ready means installing their connector, placing the speaker and fasteners, installing the door trim and connecting the battery negative cable last. At the midrange speaker in the rear side wall, fit the connector, set up the speaker, tighten the support bolts, add the quarter trim panel and link the battery's negative cable. The process for setting up the rear side wall tweeters is connecting the electric connector, attaching the speaker, placing the mounting fasteners, putting on the rear quarter trim panel and linking the battery negative cable. You need to attach the electrical connector, attach the speaker, put in the mounting bolts, put the rear panel trim in place and bind the battery negative cable to the side wall midrange speakers. Afterwards, set up the electrical connector for the tweeter, place the speaker, fix the fasteners, attach the rear quarter trim panel and link the battery negative cable.
• Rear Speaker
  68010541AA
  Q: How to Remove Car Speakers on Dodge Sprinter 2500?

  A:

  Begin by disconnecting the battery's negative cable, then remove the cover of the center front speaker. Afterwards, remove the fasteners and the connector and take the speaker from the mounting hole. When focusing on the front door midrange speakers, pull out the battery negative cable, strip the door panel trim, remove the speakers' screws and unplug the speaker's main electric connector prior to taking the speaker out. All the front door tweeters are handled in a similar way: isolate the negative battery cable, remove the cover panel, take out the bolts holding the tweeter and unplug the connector before you move the speaker. When knocking out the rear side wall midrange speaker, first cut off the battery negative, remove the quarter panel trim, undo the fasteners and take out the electrical connector. The process for the rear tweeters is the same: begin by taking out the negative battery cable, remove the quarter trim, unscrew the tweeter's fasteners and take off the electrical connection. Ease off the battery negative cable and make sure it is isolated. After that, take out the quarter trim panel, unscrew the mounting fasteners and disconnect the electrical connector from the midrange speaker before removing it. Side wall tweeters must also have their power cable disconnected from the battery, the quarter panel under the trim removed, the fasteners taken out and the electrical wires detached before removing the speaker.