How to Maintain a Wiper Arm on Dodge Sprinter 2500?

First, remove and raise the cover from the rear wiper arm pivot link on the rear door. After that, take out the washer nozzle hose from the connection in the center of the rear wiper motor shaft. Take out the nut holding the wiper arm to the wiper motor output shaft. Whenever needed, use the battery terminal puller to remove the wiper arm from the shaft beneath the brush. Once finished, move the rear wiper side to side a bit to remove the pivot end from the output shaft, then pull the wiper arm straight up to take it off. See to it that you have the wiper attached to its arm before placing it against the windshield and don't press the rear wiper arm onto the rear door glass, because this scratches the surface. Never use a screwdriver or similar tool to take off the wiper arm because this could bend it and allow it to part from the rear wiper motor while in use.

How to Safely Service and Repair a Front Wiper Arm on Dodge Sprinter 2500?

Make sure the key is out of the ignition before working on the front wiper arms so sudden wiper motion does not happen and nobody gets hurt. It's important not to raise the hood when the wiper arms are tucked under the hood, as they could be broken. Do not let the wiper arm close against the windshield without the wiper blade attached to prevent the glass from being damaged and never put wiper arms on the glass without blades to prevent scratching. Set the wiper motor to park by starting the car with the ignition pushed ON and twisting the multi-function switch to OFF; once the wipers stop, switch the ignition back to OFF. One front wiper arm is longer, positioned at the right of the car and the longer blade goes with the left front wiper, closer to the driver. Rotate the front wiper arms to their basic position by placing the lower edge of the wiper along the wiper alignment line found near the top of the lower windshield blackout. Lift the wiper arm up a little to let air out of the spring and then push the pivot end down hard onto the pivot pin. Put on the wiper arm nut tightly by turning it in the same direction 30 Nm (22 ft. lbs.). Turn on the wipers by wetting the windshield and operating the front wipers and then turn the control knob to OFF while checking where the wipers stop. In the end, join the hose from the nozzle onto the fitting located on the cowl top near the front wiper arm's pivot.

OEM Dodge Sprinter 2500 Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wiper Arms found

View related parts
Dodge Sprinter 2500 Wiper Arm, Passenger Side Part Number: 5104460AA
$69.59 MSRP: $98.35
You Save: $28.76 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Wiper; Windshield Wiper Arm, Right; Arm Wiper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Wiper Arm, Driver Side Part Number: 5104458AA
$65.51 MSRP: $95.25
You Save: $29.74 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Wiper; Windshield Wiper Arm, Left; Arm Wiper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Wiper Arm, Driver Side Part Number: 68020508AC
$41.41 MSRP: $89.05
You Save: $47.64 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade; Windshield Wiper Blade, Left, Right; Wiper Blade; Blade Assembly
- Position: Driver Side
- Replaces: 5103544AA, 5103543AA, 5124454AA, 5124455AA, 68020508AB, 68020508AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Rear Arm Part Number: 68006512AA
$49.84 MSRP: $81.70
You Save: $31.86 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Wiper; Wiper Arm; Arm Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Wiper Motor Part Number: 5103561AB
$164.29 MSRP: $242.00
You Save: $77.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Wiper; Windshield Wiper Motor; Motor Windshield Wiper
- Replaces: 5103561AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Wiper Arm, Driver Side Part Number: 68029415AA
Product Specifications
- Other Name: Washer; Windshield Wiper Arm, Left
- Position: Driver Side
- Replaces: 68017436AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Rear Arm Part Number: 68006513AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Wiper Arm; Arm Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Wiper Motor Part Number: 68017435AA
Product Specifications
- Other Name: Linkage Assembly - Windshield Wiper; Windshield Wiper Linkage; Wiper Linkage; Linkage Assembly Linkage Assembly - Windshield Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Wiper Arm

Choose OEM Wiper Arm that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wiper Arm follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 2500 Wiper Arm is a part that is highly necessary for increasing the dependability and efficiency of the Dodge Sprinter 2500 for varied weather conditions in order to increase visibility. This Wiper Arm relocates the undetermined wiper blades to the motor, thus eliminating the moisture, rainwater as well as the snow on the windshield. It is highly built to fit into the different Sprinter 2500 models well, and this makes it ideal for use by drivers who use this light commercial vehicle in many ways including as a courier vehicle and a passenger service vehicle. As for the main functions of the Dodge Sprinter 2500 Wiper Arm that guarantees the car increased performance and safety since visibility is one of the essential aspects of driving. However, it can be highlighted that the Wiper Arm, as a subassembly, has been designed to convert the rotational force of the motor into the swinging and, therefore, would provide its holders with the uniform and smooth performance in various driving scenarios. The features of the Dodge Sprinter 2500 include being fuel economical and easy to maneuver and these are supported by the Wiper Arm that enhances a clear view on the road. Moreover, in relation to its design, Wiper Arm is one of the many manifestations of quality workmanship that is expected from a Dodge car and which sets the component apart from its rivals in the automotive industry. As a highly durable and efficient part the Dodge Sprinter 2500 Wiper Arm is a reliable investment for people willing to optimize the performance and safety of their Dodge Sprinter 2500 vehicle.

Dodge Sprinter 2500 Wiper Arm Parts and Q&A

Rear Arm
68006512AA
Q: How to Maintain a Wiper Arm on Dodge Sprinter 2500?
A:
First, remove and raise the cover from the rear wiper arm pivot link on the rear door. After that, take out the washer nozzle hose from the connection in the center of the rear wiper motor shaft. Take out the nut holding the wiper arm to the wiper motor output shaft. Whenever needed, use the battery terminal puller to remove the wiper arm from the shaft beneath the brush. Once finished, move the rear wiper side to side a bit to remove the pivot end from the output shaft, then pull the wiper arm straight up to take it off. See to it that you have the wiper attached to its arm before placing it against the windshield and don't press the rear wiper arm onto the rear door glass, because this scratches the surface. Never use a screwdriver or similar tool to take off the wiper arm because this could bend it and allow it to part from the rear wiper motor while in use.
Wiper Motor
68017435AA
Q: How to Safely Service and Repair a Front Wiper Arm on Dodge Sprinter 2500?
A:
Make sure the key is out of the ignition before working on the front wiper arms so sudden wiper motion does not happen and nobody gets hurt. It's important not to raise the hood when the wiper arms are tucked under the hood, as they could be broken. Do not let the wiper arm close against the windshield without the Wiper Blade attached to prevent the glass from being damaged and never put wiper arms on the glass without blades to prevent scratching. Set the Wiper Motor to park by starting the car with the ignition pushed ON and twisting the multi-function switch to OFF; once the wipers stop, switch the ignition back to OFF. One front wiper arm is longer, positioned at the right of the car and the longer blade goes with the left front wiper, closer to the driver. Rotate the front wiper arms to their basic position by placing the lower edge of the wiper along the wiper alignment line found near the top of the lower windshield blackout. Lift the wiper arm up a little to let air out of the spring and then push the pivot end down hard onto the pivot pin. Put on the wiper arm nut tightly by turning it in the same direction 30 Nm (22 ft. lbs.). Turn on the wipers by wetting the windshield and operating the front wipers and then turn the control knob to OFF while checking where the wipers stop. In the end, join the hose from the nozzle onto the fitting located on the cowl top near the front wiper arm's pivot.