Where is the Crankshaft Position Sensor located and How to remove it on Dodge Sprinter 2500?

At the rear of the engine block, just to the left front edge of the transmission bellhousing, is the crankshaft position sensor. To remove the battery, first disconnect the negative cable from the battery. Then raise and support the vehicle. Once again, detach the crankshaft position sensor harness connector and then remove the bolt that fastens the crankshaft position sensor. To conclude, the crankshaft position sensor should be taken out.

How to service the Crankshaft Position Sensor on Dodge Sprinter 2500?

To repair the Crankshaft Position Sensor, the negative battery cable should first be disconnected along with the crankshaft wiring harness connector unplugged. The crankshaft sensor retaining bolt is then removed to take out the sensor. To install, position the crankshaft position sensor into the access hole and install the retaining bolt tightened to 80 lbs.in. (9 N-m) Now, connect the crankshaft position sensor wiring harness connector and reconnect the negative battery cable.

OEM Dodge Sprinter 2500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
Dodge Sprinter 2500 Crankshaft Position Sensor Part Number: 68039478AC
$108.60 MSRP: $162.00
You Save: $53.40 (33%)
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Sensor, Revolutions Per Minute; Crankshaft Sensor
- Replaces: 5175763AA, 5175763AB, 68039478AA, 68039478AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Crankshaft Position Sensor Part Number: 5080352AA
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; RPM Sensor; Engine Management.; Sensor Crankshaft Position; Sensor Crankshaft
- Replaces: 5080350AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL

Dodge Sprinter 2500 Crankshaft Position Sensor

Choose OEM Crankshaft Position Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Crankshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Sprinter 2500 Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
68039478AC
Q:
Where is the Crankshaft Position Sensor located and How to remove it on Dodge Sprinter 2500?
A:
At the rear of the engine block, just to the left front edge of the transmission bellhousing, is the crankshaft position sensor. To remove the battery, first disconnect the negative cable from the battery. Then raise and support the vehicle. Once again, detach the crankshaft position sensor harness connector and then remove the bolt that fastens the crankshaft position sensor. To conclude, the crankshaft position sensor should be taken out.
Crankshaft Position Sensor
5080352AA
Q:
How to service the Crankshaft Position Sensor on Dodge Sprinter 2500?
A:
To repair the Crankshaft Position Sensor, the negative battery cable should first be disconnected along with the crankshaft wiring harness connector unplugged. The crankshaft sensor retaining bolt is then removed to take out the sensor. To install, position the crankshaft position sensor into the access hole and install the retaining bolt tightened to 80 lbs.in. (9 N-m) Now, connect the crankshaft position sensor wiring harness connector and reconnect the negative battery cable.