How to Remove and Replace the Mass Air Flow Sensor in Engine 612.981 on Dodge Sprinter 2500?

For cars with code MD1 or MS5 and models 902.6, 903.6, 904.6 and 905.6 and MF8, also on models WD1XD141 through WD5WD741, begin by removing the air intake connector from the mass air flow sensor. Now, remove the sensor from the air cleaner housing by unplugging the connector from the sensor first. To install, go backward through the steps you just followed to remove it. Make sure you attach the air intake hose, connector, air cleaner housing, screws and hose clamps in their original positions.

How to Install a Mass Air Flow Sensor on Dodge Sprinter 2500?

Place the Mass Air Flow Sensor so that its appearance is in line with air intake hole 3 and secure its place by putting back retaining clip 4 once the Mass Air Flow Sensor is installed. Next, hold down the left notch 2 and the right notch 3. Reconnect connector 1 on the Mass Air Flow Sensor harness and then insert the engine cover and air filter housing into their places. In the end, attach the negative battery cable again.

OEM Dodge Sprinter 2500 Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mass Air Flow Sensors found

View related parts
Dodge Sprinter 2500 Mass Air Flow Sensor Part Number: 68017661AA
Product Specifications
- Other Name: Sensor - Mass Airflow; Mass Air Flow Sensor Assembly; Air Mass Sensor; Sensor Mass Airflow
- Replaces: 5117501AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL
View related parts
Dodge Sprinter 2500 Mass Air Flow Sensor Part Number: 5103615AA
Product Specifications
- Other Name: Sensor - Mass Airflow; Mass Air Flow Sensor Assembly; Air Mass Sensor; Sensor Mass Airflow
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Mass Air Flow Sensor Part Number: 68011734AA
Product Specifications
- Other Name: Sensor - Mass Airflow; Mass Air Flow Sensor Assembly; Air Mass Sensor; Sensor Mass Airflow
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 2500 | Base | 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Mass Air Flow Sensor

Choose OEM Mass Air Flow Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Mass Air Flow Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 2500 Mass Air Flow Sensor is a crucial unit that dramatically boosts the car's dependability and efficiency. This sensor quantifies the amount of air that gets into the engine and pass information to the PCM to help control the air fuel mixture to enhance combustion. A properly working Dodge Sprinter 2500 Mass Air Flow Sensor helps the engine run properly and eliminates problems that may occur during acceleration and choke and improper proportions of air and fuel. Both new and used, this sensor is compatible with different models of Dodge Sprinter 2500; whether it is the 2.3L I4 OM601 Diesel or 2.7L turbo-diesel, every model is likely to get this sensor to its optimal performance level. Mass Air Flow Sensor helps to increase the fuel efficiency of the Dodge Sprinter 2500 along with ensuring safety by continuously monitoring the performance of the vehicle's engine. The technologies implied in the car include the vane meter and hot wire that distinctly make it unique in the automotive category, hence offering accurate readings. Maintenance and cleaning issues of the Dodge Sprinter 2500 Mass Air Flow Sensor are vital in order to ensure long term efficiency hence making it a vehicle of desire in the market. In sum, the Dodge Mass Air Flow Sensor enhances the Dodge Sprinter 2500 models beyond reasonable doubt, making it one of the critical components of the brand's lineup.

Dodge Sprinter 2500 Mass Air Flow Sensor Parts and Q&A

Mass Air Flow Sensor
5103615AA
Q: How to Remove and Replace the Mass Air Flow Sensor in Engine 612.981 on Dodge Sprinter 2500?
A:
For cars with code MD1 or MS5 and models 902.6, 903.6, 904.6 and 905.6 and MF8, also on models WD1XD141 through WD5WD741, begin by removing the air intake connector from the mass air flow sensor. Now, remove the sensor from the air cleaner housing by unplugging the connector from the sensor first. To install, go backward through the steps you just followed to remove it. Make sure you attach the air intake hose, connector, air cleaner housing, screws and hose clamps in their original positions.
Mass Air Flow Sensor
68017661AA
Q: How to Install a Mass Air Flow Sensor on Dodge Sprinter 2500?
A:
Place the Mass Air Flow Sensor so that its appearance is in line with air intake hole 3 and secure its place by putting back retaining clip 4 once the Mass Air Flow Sensor is installed. Next, hold down the left notch 2 and the right notch 3. Reconnect connector 1 on the Mass Air Flow Sensor harness and then insert the engine cover and air filter housing into their places. In the end, attach the negative Battery Cable again.