First, unhook and separate the battery's negative cable when servicing the power antenna. After that, take off the drain tube, electronic connection and antenna cord. With the antenna, disconnect the rear bolts and maneuver it through the opening for grommets in the quarter panel. To install the antenna, insert it up through the hole in the quarter panel, fix the bolts while tightening them to 12 Nm (110 in. lbs.) and secure them with the rubber insulator. After linking the
Antenna Cable with the electrical connector, attach the drain tube back to the device. If there is a ground strap, attach it, along with the fastener and tighten both to 12 Nm (110 in. lbs.); then, reconnect the battery negative cable.