If you want to service or repair the
Antenna mast, first isolate the negative line of the battery first. After that, slide the right trunk liner away and unscrew the antenna mast from the antenna body where it was attached. Remove the screw from the mounting bracket and bring down the antenna body over the rubber grommet; after that, unplug the antenna lead from the base of the antenna. When installing, push the lead of the antenna into the bottom of the antenna housing and lift the housing through the grommet using the rubber ring. Latch the screw into place in the mounting bracket, twist it to 12 Nm (106 in. lbs.) and finally put in the antenna mast. After everything else is done, slide back the trunk liner and attach the battery negative cable.