Start by releasing the
Hood Latch and pulling the hood up to service the
Radiator support crossmember. Detach every fastener, wire, radiator, refrigerant line or condenser connected to the radiator support crossmember. After that, clear the fasteners on the bottom frame that hold the radiator support crossmember and the bolts that support it on the upper rail. With these components removed, take out the radiator support crossmember from the vehicle. When installing, put the radiator support crossmember in the proper position and secure the bolts to the lower frame, next fitting the bolts for the upper rail. Afterward, attach all fasteners, wires, radiator, refrigerant lines or condenser to the radiator support crossmember and verify that all components being reinstalled are working well.