How to Install an Axle Shaft on Jeep Commander?

Before installing the axle shaft, be sure that all loose bearing flange studs are tightened to 27 Nm (20 ft. lbs.). Always start by inserting the axle shaft into the axle bearing and into the axle flange. Now, add the axle shaft to the axle tube and backing plate, making sure a fresh O-ring is put on the axle as you place it in. Feed the O-ring around the edge of the backing plate and advance the axle inside until the bearing shows. Attach an O-ring to the axle bearing and slide the axle into the axle tube afterwards. Put the axle flange nuts in place and tighten them using 119 Nm (88 ft. lbs.). Place the speed sensors onto the axle tube flange and apply Mopar(R) Stud N' Bearing Mount Adhesive to a new plug inserted into the axle flange hole. Lastly, attach the calipers and rotors onto the system.

How to Safely Remove an Axle Shaft on Jeep Commander?

It is important to be sure the vehicle is in neutral and on a hoist before removing the axle shaft. You should begin by taking the calipers and rotors off your car. After that, hit the end plug loose from the flange with a hammer and punch, then take it out by hand. Take out the speed sensors from the axle tube flange and remove the nuts on the axle. Remove the axle shaft and backing plate until you can see the axle bearing and after that, extract the O-ring from the axle bearing. Move the axle shaft straight out of the axle tube, backing plate, bearing and flange and tap it loose by striking the shaft head with a brass drift through the hole in the plug.

OEM Jeep Commander Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Axle Shafts found

View related parts
Jeep Commander Axle Assembly, Front Driver Side Part Number: 52104591AB
$439.74 MSRP: $668.00
You Save: $228.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 52104591AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Assembly, Front Passenger Side Part Number: 52104590AA
$436.15 MSRP: $639.00
You Save: $202.85 (32%)
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Driver Side Part Number: 5183529AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Front Part Number: 52111347AB
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111347AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Passenger Side Part Number: 5183528AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Assembly, Front Driver Side Part Number: 52104701AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: RL104701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114375AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Passenger Side Part Number: 52114374AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52111913AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114077AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Front Part Number: 52111969AC
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111969AB, 52111969AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52111899AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114076AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Assembly, Rear Part Number: 52114835AA
Product Specifications
- Other Name: Axle - Rear Complete; Drive Axle Assembly, Rear; Axle Shaft; Axle
- Position: Rear
- Replaces: 5135770AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Assembly, Rear Part Number: 52114836AA
Product Specifications
- Other Name: Axle - Rear Complete; Drive Axle Assembly, Rear; Axle Shaft; Axle
- Position: Rear
- Replaces: 5135810AF, 5135810AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Axle Shaft

Choose OEM Axle Shaft that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Axle Shaft follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Axle Shaft is one of the most trusted and efficient systems that are vital for the jeep commander, they assist in the transmission of torque coming from the differential to the drive wheels. This design enables the wheels of the Jeep Commander to rotate in opposite directions and therefore increase the traction that is experienced when cornering the car. For the Jeep Commander, only a strong axle beams that contain the axle shafts are implemented and utilized within a rigid live axle suspension. Coming in full-floating and semi-floating types, the Axle Shaft is built to endure rigorous usage when on the road due to the materials used to make them; the chrome-molybdenum or carbon steel. It's adaptable to various Jeep Commander's generations and types, such as the Jeep Commander XK and the 2022 Jeep Meridian, which indicates the significance of the part to sustain the car's features. The Axle Shaft not only brings improvement in operation performance, but also play the important role of safety performance in vehicle. Some of the translate characteristics that separated Axle Shaft from other automotive options include expandability of wheel speeds, a feature that sets this kind of axle shaft apart in the market it serves and provides a vantage point for detecting a superior and durable SUV vehicle for the market. Recognizable for its excellence and functionality, Axle Shaft reflects the company's ideals, upholding the veneration among the Jeep connoisseurs and users.

Jeep Commander Axle Shaft Parts and Q&A

Axle Assembly, Front Driver Side
52104591AB
Q: How to Install an Axle Shaft on Jeep Commander?
A:
Before installing the axle shaft, be sure that all loose bearing flange studs are tightened to 27 Nm (20 ft. lbs.). Always start by inserting the axle shaft into the axle bearing and into the axle flange. Now, add the axle shaft to the axle tube and backing plate, making sure a fresh O-ring is put on the axle as you place it in. Feed the O-ring around the edge of the backing plate and advance the axle inside until the bearing shows. Attach an O-ring to the axle bearing and slide the axle into the axle tube afterwards. Put the axle flange nuts in place and tighten them using 119 Nm (88 ft. lbs.). Place the Speed Sensors onto the axle tube flange and apply Mopar(R) Stud N' Bearing Mount Adhesive to a new plug inserted into the axle flange hole. Lastly, attach the calipers and rotors onto the system.
Axle Assembly, Front Passenger Side
52104590AA
Q: How to Safely Remove an Axle Shaft on Jeep Commander?
A:
It is important to be sure the vehicle is in neutral and on a hoist before removing the axle shaft. You should begin by taking the calipers and rotors off your car. After that, hit the end plug loose from the flange with a hammer and punch, then take it out by hand. Take out the Speed Sensors from the axle tube flange and remove the nuts on the axle. Remove the axle shaft and backing plate until you can see the axle bearing and after that, extract the O-ring from the axle bearing. Move the axle shaft straight out of the axle tube, backing plate, bearing and flange and tap it loose by striking the shaft head with a brass drift through the hole in the plug.