How to Ensure Proper Installation of a Drive Shaft on Jeep Commander?

Before installing the drive shaft, clean all propeller shaft bolts and use Mopar(R) Lock & Seal Adhesive or a similar product on the bolt threads. Make sure the propeller shaft boot is not cracked or loose and change it as needed. The reference marks should be matched as you install the propeller shaft on the transfer case or transmission at first. After plumbing the gasket, apply 108 Nm (80 ft. lbs.) of torque to each of the flange bolts. Then, place the propeller shaft onto the pinion flange and line up the marks, tighten the bolts with a torque of 108 Nm (80 ft. lbs.). Careful adherence to these instructions prevents driveline vibration.

How to Remove and Replace the Drive Shaft on Jeep Commander?

Before touching the propeller shaft, the vehicle should be in gear and lifted on a platform. Be sure to write down where the propeller shaft, pinion flange and transmission/transfer case flanges should be placed during installation. Remove the propeller shaft from the propeller shaft axle pinion flange and from the vehicle transfer case or transmission flange. After that, take out the propeller shaft from the vehicle. The slip joint boot of the propeller shaft can be exchanged and marking both shaft sections before assembly helps ensure it is done correctly. Failing to obey these instructions might result in the driveline vibrating.

OEM Jeep Commander Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Drive Shafts found

View related parts
Jeep Commander Drive Shaft Part Number: 52853004AF
$914.21 MSRP: $1410.00
You Save: $495.79 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853004AE, 52853004AC, 52853004AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52105728AE
$1230.88 MSRP: $1815.00
You Save: $584.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52105728AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52853431AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52853432AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Base, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52105760AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52105760AE, RL105760AF, 52105760AD, 52105760AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52105726AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52105726AD, 52105726AE, 52105726AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52853433AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Drive Shaft Part Number: 52853006AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853006AC, 52853006AE, 52853006AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Commander Drive Shaft

Choose OEM Drive Shaft that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Drive Shaft follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Drive Shaft Service is a well-known Jeep part that is appreciated by people for its high quality and efficiency that immediately affects the Jeep Commander vehicles. Located either in front or at the back of the car, the Drive Shaft plays a central role in moving the car from one place to another especially on different surfaces on the road. Typically, Jeep Commanders like the XK and the 2022 model employs different types of Drive Shafts; the one-piece, two-piece, and the slip in-tube kind of Shafts are able to manage torsion and shear stress on the axle housings while being relatively light to reduce inertia. This flexibility improves the working conditions and protection of the Commander in four-wheel and all-wheel drive models where several Drive Shafts complement transfers to transverse the torque between the front and rear beams. Not only does the Jeep Commander Drive Shaft play the role of positioning and dealing with differences in distance but also has an impact on the driving dynamic in terms of performance. For this purpose, additional features, like for example higher crash safety of some Jeeps models in the Commander Drive Shaft also add distinction in the automotive industry. Thus, Jeep Commander Drive Shaft is compatible with different models of Commander and it is a perfect example of Jeep emphasizing on the quality, so this mid-size SUV is worth to be listed as one of the vehicles, which will provide the needed performance and safety for drivers.

Jeep Commander Drive Shaft Parts and Q&A

Drive Shaft
52105760AF
Q: How to Ensure Proper Installation of a Drive Shaft on Jeep Commander?
A:
Before installing the drive shaft, clean all propeller shaft bolts and use Mopar(R) Lock & Seal Adhesive or a similar product on the bolt threads. Make sure the propeller shaft boot is not cracked or loose and change it as needed. The reference marks should be matched as you install the propeller shaft on the transfer case or transmission at first. After plumbing the gasket, apply 108 Nm (80 ft. lbs.) of torque to each of the flange bolts. Then, place the propeller shaft onto the pinion flange and line up the marks, tighten the bolts with a torque of 108 Nm (80 ft. lbs.). Careful adherence to these instructions prevents driveline vibration.
Drive Shaft
52853004AF
Q: How to Remove and Replace the Drive Shaft on Jeep Commander?
A:
Before touching the propeller shaft, the vehicle should be in gear and lifted on a platform. Be sure to write down where the propeller shaft, pinion flange and transmission/transfer case flanges should be placed during installation. Remove the propeller shaft from the propeller shaft axle pinion flange and from the vehicle transfer case or transmission flange. After that, take out the propeller shaft from the vehicle. The slip joint boot of the propeller shaft can be exchanged and marking both shaft sections before assembly helps ensure it is done correctly. Failing to obey these instructions might result in the driveline vibrating.