How to Remove an Exhaust Manifold on Jeep Compass?

Before removing the exhaust manifold, remove the engine cover. Following that, detach the negative cable from the battery, loosen the bolts of the upper heat shield and then remove the shield. After that, unhook the exhaust pipe from the manifold and take out the support bracket. Then, take off the electrical connector attached to the oxygen sensor and disconnect each retaining fastener of the exhaust manifold. At the end, get rid of the manifold gasket.

How to Install an Exhaust Manifold on Jeep Compass?

To install the exhaust manifold, set a new gasket in place and skip adding sealer. After bolting on the exhaust manifold, tighten everything to 34 Nm (25 ft. lbs.). Then install the heat shields, sealing them using 12 Nm (105 in. lbs.) of torque. After that, secure the exhaust manifold support bracket (2) and replace the old gasket under the catalytic converter with a new one. Join the exhaust pipe to the manifold (1) and tighten the fasteners to 28 Nm (250 in. lbs.). After that, link the electrical connector from the oxygen sensor to the battery (3) and replace the negative cable to the battery (3). The next step is to attach the engine cover.

OEM Jeep Compass Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Manifolds found

View related parts
Jeep Compass Exhaust Manifold Part Number: 4693321AD
$321.77 MSRP: $479.00
You Save: $157.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Exhaust for Converter Manifold Assembly, Refer to Group 11 Exhaust.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Compass | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Exhaust Manifold Part Number: 68432342AA
$1721.10 MSRP: $3075.00
You Save: $1353.90 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Manifold W/Converter; Exhaust and Catalytic Converter Maniverter.
- Replaces: 68403179AA, 68367991AA, 68081821AB, 68081821AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2022 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Exhaust Manifold Part Number: 68570195AC
$499.22 MSRP: $735.00
You Save: $235.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Turbo Kit - Engine; Turbocharger
- Replaced by: 68570195AE
- Replaces: 68570195AB, 68570195AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025 Jeep Compass | Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk | 4 Cyl 2.0 L GAS
View related parts
Jeep Compass Exhaust Manifold Part Number: 68096391AC
$1607.20 MSRP: $2335.00
You Save: $727.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Converter & Pipe; Manifold Exhaust And Catalytic Converter Maniverter; Catalytic Converter
- Replaces: 68096391AB, 68096391AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2013 Jeep Compass | Base, Latitude, Limited, Sport | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Exhaust Manifold Part Number: 68044921AB
$1796.13 MSRP: $2640.00
You Save: $843.87 (32%)
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter
- Replaces: 68044921AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Compass | Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Exhaust Manifold Part Number: 68315810AA
$670.59 MSRP: $970.00
You Save: $299.41 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Manifold W/Converter; Manifold Exhaust And Catalytic Converter Maniverter; Manifold Exhaust; Catalytic Converter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Exhaust Manifold Part Number: 5105408AE
Product Specifications
- Other Name: Converter - Exhaust
- Replaces: 5105408AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Compass | Limited, Sport | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Catalytic Converter Part Number: 5105460AF
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Exhaust Manifold
- Replaces: 5105460AD, 5105460AC, 5105460AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Compass | Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Compass Exhaust Manifold

Choose OEM Exhaust Manifold that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Jeep Compass matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Compass parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Exhaust Manifold in Jeep Compass vehicles has the primary function of channeling hot gases resulting from the operation of the engine to the exhaust system for achievement of optimum engine performance. Depending on the location of the different types of engines, the manifold is situated to ensure that the exhaust gases are directed through other parts such as the catalytic converter or the muffler while at the same time avoiding an intake reversion which slows down the airflow and reduces its productivity. Jeep Compass models have used numerous Exhaust Manifold such as widely used cast iron and stainless steel Exhaust Manifold and customized headers that increase engine performance by lowering flow restriction. These headers enhance the velocity of the exhaust gas thus an overall better performance. Mainly, the variations in the design and the materials used in the Exhaust Manifold can affect the performance of the Jeep Compass as well as the engine emissions, hence, the replacement of a faulty Exhaust Manifold should be done as early as possible.

Jeep Compass Exhaust Manifold Parts and Q&A

Exhaust Manifold
68044921AB
Q: How to Remove an Exhaust Manifold on Jeep Compass?
A:
Before removing the exhaust manifold, remove the engine cover. Following that, detach the negative cable from the battery, loosen the bolts of the upper heat shield and then remove the shield. After that, unhook the exhaust pipe from the manifold and take out the support bracket. Then, take off the electrical connector attached to the Oxygen Sensor and disconnect each retaining fastener of the exhaust manifold. At the end, get rid of the manifold gasket.
Exhaust Manifold
4693321AD
Q: How to Install an Exhaust Manifold on Jeep Compass?
A:
To install the exhaust manifold, set a new gasket in place and skip adding sealer. After bolting on the exhaust manifold, tighten everything to 34 Nm (25 ft. lbs.). Then install the heat shields, sealing them using 12 Nm (105 in. lbs.) of torque. After that, secure the exhaust manifold support bracket (2) and replace the old gasket under the catalytic converter with a new one. Join the exhaust pipe to the manifold (1) and tighten the fasteners to 28 Nm (250 in. lbs.). After that, link the electrical connector from the oxygen sensor to the battery (3) and replace the negative cable to the battery (3). The next step is to attach the engine cover.