Can You Replace the Hood Hinge Without Removing the Hood on Jeep Compass?

You don't need to remove the hood to replace the hood hinges, as you can replace them both separately. Align the hinge (1) with the hood and use the reference points you made previously. Next, put the nuts (3) in place to secure the hood hinge (1). Tighten the bolts to 20 Nm (15 ft. lbs.). After that, install the bolts (2) that keep the hood hinge (1) connected to the fender rail. Still, position the hood hinge where it belongs on the hood and the fender rail and secure the bolts at 20 Nm (15 ft. lbs.) using the marks for support. Set the position of the hood correctly if possible.

How to install a hood hinge on Jeep Compass?

Place the hood hinge onto the hood, line up the hood with the reference marks and then connect the hinge to the hood with all the nuts, tightening them to about 20 Nm (15 ft. lbs.). After that, secure the hinge to the fender rail using the bolts and align them according to the reference marks, then tighten them to 20 Nm (15 ft. lbs.). If it doesn't look right, adjust the hood to fit it properly.

OEM Jeep Compass Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Hinges found

View related parts
Jeep Compass Hinge, Front Passenger Side Part Number: 68086320AD
$27.64 MSRP: $40.90
You Save: $13.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 68086320AA, 68086320AB, 68086320AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Compass | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Hinge, Front Driver Side Part Number: 68086321AD
$29.31 MSRP: $43.70
You Save: $14.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 68086321AB, 68086321AA, 68086321AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Compass | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Hinge, Front Driver Side Part Number: 68244075AA
$46.00 MSRP: $67.35
You Save: $21.35 (32%)
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Hinge, Front Passenger Side Part Number: 68244074AA
$46.00 MSRP: $67.35
You Save: $21.35 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Hinge, Front Driver Side Part Number: 4589117AI
$47.38 MSRP: $95.75
You Save: $48.37 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left
- Position: Front Driver Side
- Replaces: 4589117AC, 4589117AG, 4589117AH, 4589117AE, 4589117AF, 4589117AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Compass | Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Hinge, Front Passenger Side Part Number: 4589116AI
$21.96 MSRP: $44.30
You Save: $22.34 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right
- Position: Front Passenger Side
- Replaces: 4589116AF, 4589116AG, 4589116AD, 4589116AE, 4589116AC, 4589116AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Compass | Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Compass Hood Hinge

Choose OEM Hood Hinge that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Jeep Compass matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Compass parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Compass Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
4589116AI
Q: Can You Replace the Hood Hinge Without Removing the Hood on Jeep Compass?
A:
You don't need to remove the hood to replace the hood hinges, as you can replace them both separately. Align the hinge (1) with the hood and use the reference points you made previously. Next, put the nuts (3) in place to secure the hood hinge (1). Tighten the bolts to 20 Nm (15 ft. lbs.). After that, install the bolts (2) that keep the hood hinge (1) connected to the fender rail. Still, position the hood hinge where it belongs on the hood and the fender rail and secure the bolts at 20 Nm (15 ft. lbs.) using the marks for support. Set the position of the hood correctly if possible.
Hinge, Front Driver Side
4589117AI
Q: How to install a hood hinge on Jeep Compass?
A:
Place the hood hinge onto the hood, line up the hood with the reference marks and then connect the hinge to the hood with all the nuts, tightening them to about 20 Nm (15 ft. lbs.). After that, secure the hinge to the fender rail using the bolts and align them according to the reference marks, then tighten them to 20 Nm (15 ft. lbs.). If it doesn't look right, adjust the hood to fit it properly.