How to Properly Install Rod Bearings and Ensure Correct Clearance on Jeep Compass?

Three sizes of rod bearings are available and you can tell them apart by looking at the nose of the crankshaft. To measure the connecting rod bearing clearance, place Plastigage onto the bearing and consult the engine handbook for the proper specification. Never reuse the rod bolts; before installing fresh units, apply oil to the threads and underside of the head with clean engine oil. Add every bolt finger tight, then go ahead to tighten each one alternately to assemble the cap properly. Stretch every connecting rod bolt to 20 Nm (15 ft. lbs.) and then tighten it another 90°. Afterward, check the side clearance of the connecting rod down the middle by using a feeler gauge and review the engine manual for the correct clearance values.

OEM Jeep Compass Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rod Bearings found

View related parts
Jeep Compass Connecting Rod Bearing Part Number: 5047638AC
$3.99 MSRP: $6.00
You Save: $2.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings; Bearing Connecting Rod +3 Micron Used For Upper And Lower; Bearing Connecting Rod +3 Micron See Note
- Replaces: 5047638AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Connecting Rod Bearing Part Number: 5047637AC
$5.12 MSRP: $6.80
You Save: $1.68 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings; Bearing Connecting Rod Standard Used For Upper And Lower; Bearing Connecting Rod Standard See Note
- Replaces: 5047637AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Bearings Part Number: 4884912AB
$16.02 MSRP: $23.55
You Save: $7.53 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing Connecting Rod Standard See Note
- Replaces: 1115A150, 4884912AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Compass | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Connecting Rod Bearing Part Number: 5047636AC
$3.77 MSRP: $5.50
You Save: $1.73 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings; Bearing Connecting Rod - 3 Micron Used For Upper And Lower; Bearing Connecting Rod-3 Micron See Note
- Replaces: 5047636AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS

Jeep Compass Rod Bearing

Choose OEM Rod Bearing that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Rod Bearing follows strict manufacturing steps to lock in quality and fit. If your Jeep Compass matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Compass parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Compass Rod Bearing is a crucial and special part that determines or boosts the dependability and efficiency of Jeep Compass automobiles. Being located between the connecting rods and the crankshaft, the prime function of the Rod Bearing is to hold and help rotate while assuring proper oil clearance for the cranking engine. Rod Bearings applied by Jeep Concern in various Compass models are of various types, although bi-metal and tri-metal ones have been most frequently used. Among all the bearings, the tri-metal Rod Bearing deserves special attention because of its increased strength and fatigue failure resistance, so the Compass bearings will be suitable for the performance models. This feature does not only increase the life span of the engine but also helps in avoiding incidences of an engine breakdown. Jeep Compass Rod Bearing is available for installation in the different models of Compass to provide the customers means to lubricate the engines, which are crucial to high output, with less friction. Also, the Rod Bearing includes the specific coating and the custom design of the eccentricity for the maximum oil clearance, all of this increases the efficiency as well. When the Jeep Compass was first released in the year 2007, there were changes, but the role of the Rod Bearing has not changed and that plays a huge role in defining its presence in the automotive market. As the SUV market keeps on expanding the upgraded ability and reliability of vehicles remain a priority and hence the Jeep Compass Rod Bearing is yet a growing illustration of Jeep commitment to delivering improved quality vehicles.

Jeep Compass Rod Bearing Parts and Q&A

Bearings
4884912AB
Q: How to Properly Install Rod Bearings and Ensure Correct Clearance on Jeep Compass?
A:
Three sizes of rod bearings are available and you can tell them apart by looking at the nose of the Crankshaft. To measure the connecting rod bearing clearance, place Plastigage onto the bearing and consult the engine handbook for the proper specification. Never reuse the rod bolts; before installing fresh units, apply oil to the threads and underside of the head with clean engine oil. Add every bolt finger tight, then go ahead to tighten each one alternately to assemble the cap properly. Stretch every connecting rod bolt to 20 Nm (15 ft. lbs.) and then tighten it another 90°. Afterward, check the side clearance of the connecting rod down the middle by using a feeler gauge and review the engine manual for the correct clearance values.