The exterior names are secured to the body by tape. To remove the old adhesive, first tape a length of masking tape along the top edge of the nameplate. If temperatures are less than 21°C (70°F), make sure to warm your emblem gently using a heat lamp or gun, avoiding heat over 52°C (120°F). To remove the adhesive backing, place a trim stick C-4755 or a hard wood wedge behind the emblem and pull the body away and clean up the adhesive with Mopar® Super Clean solvent. Before installing, take away the cover from the adhesive tape on the back of the emblem, put it where you want it on the body and press it closely with your hand. When it's colder than 21°C (70°F), use a heat lamp or gun to re-heat the emblem to ensure a good bond, keeping the temperature below 52°C (120°F).