How to service and repair a Front Cross-Member on Jeep Patriot?

You should raise and support the vehicle before servicing or repairing the front cross-member. After that, take out the four wheel well screws. Should you have them, remove the three front bolts, the three at rear and one push pin fastener from the middle of the belly pan. The next step is to get rid of the crossmember bolt. Take the engine mount bolt and get rid of the fore/aft crossmember.

How to Install and Secure the Bolts for the Front Cross-Member and Rear Crossmember on Jeep Patriot?

Begin by putting the fore/aft crossmember across the center of the car and pushing the anti-roll mount through bolt (2) into it. After that, follow this order: tighten bolt (1) to 78 Nm (58 ft. lbs.), bolt (2) to 78 Nm (58 ft. lbs.) and finish by tightening bolt (3) to 129 Nm (95 ft. lbs.). Following that, set the torque on bolt (2) to 65 Nm (48 ft. lbs.). When a belly pan is included, join it by screwing the three front screws (4) and three rear screws (2) into place and insert a push pin fastener in the center of the belly pan.

OEM Jeep Patriot Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
Jeep Patriot Lower Crossmember, Front Part Number: 5115402AH
$252.26 MSRP: $448.00
You Save: $195.74 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Side Rail; Radiator Support Panel, Front; Crossmember Front Side Rail Bracket Attaching; Crossmember Front Side Rail Lower
- Position: Front
- Replaces: 5115402AE, 5115402AG, 5115402AD, 5115402AC, 5115402AB, 5115402AF, 5115402AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Engine Cradle, Front Part Number: 68211659AA
$650.36 MSRP: $949.00
You Save: $298.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front; Crossmember; Crossmember Front Suspension
- Position: Front
- Replaces: 5105623AC, 5105623AE, 5105623AG, 5105623AH, 5105623AB, 5105623AA, 5105623AI, 5105623AF, 5105623AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Front Cross-Member

Choose OEM Front Cross-Member that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Front Cross-Member follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Patriot Front Cross-Member Parts and Q&A

Lower Crossmember, Front
5115402AH
Q: How to service and repair a Front Cross-Member on Jeep Patriot?
A:
You should raise and support the vehicle before servicing or repairing the front cross-member. After that, take out the four wheel well screws. Should you have them, remove the three front bolts, the three at rear and one push pin fastener from the middle of the belly pan. The next step is to get rid of the crossmember bolt. Take the engine mount bolt and get rid of the fore/aft crossmember.
Engine Cradle, Front
68211659AA
Q: How to Install and Secure the Bolts for the Front Cross-Member and Rear Crossmember on Jeep Patriot?
A:
Begin by putting the fore/aft crossmember across the center of the car and pushing the anti-roll mount through bolt (2) into it. After that, follow this order: tighten bolt (1) to 78 Nm (58 ft. lbs.), bolt (2) to 78 Nm (58 ft. lbs.) and finish by tightening bolt (3) to 129 Nm (95 ft. lbs.). Following that, set the torque on bolt (2) to 65 Nm (48 ft. lbs.). When a belly pan is included, join it by screwing the three front screws (4) and three rear screws (2) into place and insert a push pin fastener in the center of the belly pan.