How to remove the Rear Crossmember on Jeep Patriot?

You must first unbolt the rear brake shoes to take out the cross-member. After that, detach the park brake cable from the lever. With the hair pin clip removed, take out the brake cable from its place at the backing plate. After that, undo the bolt and release the brake line from the trailing arm. After that, remove another bolt, the clip and cut the brake line from the trailing arm. Place the wheel speed sensors out of the way so that you can take out the crossmembers. Should you need to, take out the rear drive module. Get rid of all the cotter pins, nuts and washers and separate the two half shafts. Then, take out both lower strut bolts and trailing link bushing bolts. With the car up on jacks, secure the rear cradle beneath (using a suitable lifting tool) and loosen and take out the rear cradle bolts. At this stage, take out the nuts on the lower stabilizer links, remove the bolts on the lower and upper links at the cradle and unbolt the toe link cams from the cradle. Finally, remove the suspension knuckle assemblies and the stabilizer bushing bolts to separate the stabilizer bar from the cradle.

How to Install and Secure the Bolts for the Front Cross-Member and Rear Crossmember on Jeep Patriot?

Begin by putting the fore/aft crossmember across the center of the car and pushing the anti-roll mount through bolt (2) into it. After that, follow this order: tighten bolt (1) to 78 Nm (58 ft. lbs.), bolt (2) to 78 Nm (58 ft. lbs.) and finish by tightening bolt (3) to 129 Nm (95 ft. lbs.). Following that, set the torque on bolt (2) to 65 Nm (48 ft. lbs.). When a belly pan is included, join it by screwing the three front screws (4) and three rear screws (2) into place and insert a push pin fastener in the center of the belly pan.

OEM Jeep Patriot Rear Crossmember

Rear Suspension Crossmember

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rear Crossmembers found

View related parts
Jeep Patriot Rear Crossmember Part Number: 5115538AB
$269.65 MSRP: $397.00
You Save: $127.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Rear Floor; Floor Crossmember; Crossmember Rear Floor
- Position: Rear
- Replaces: 5115538AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Suspension Crossmember, Rear Part Number: 68211933AB
$739.67 MSRP: $1085.00
You Save: $345.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Rear Suspension; Suspension Subframe Crossmember, Rear; Crossmember; Crossmember Rear Suspension
- Position: Rear
- Replaces: 5105251AC, 5105251AB, 5105251AD, 68211933AA, 5105251AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Suspension Crossmember, Rear Part Number: 68211932AB
$869.06 MSRP: $1270.00
You Save: $400.94 (32%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Rear Suspension; Suspension Subframe Crossmember, Rear; Crossmember; Crossmember Rear Suspension
- Position: Rear
- Replaces: 5105252AB, 5105252AD, 5105252AC, 68211932AA, 5105252AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Rear Crossmember

Choose OEM Rear Crossmember that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Rear Crossmember follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Businesses use the Jeep Patriot Rear Crossmember due to its reliability and performance features which support Jeep Patriot structural integrity. The Rear Crossmember functions to support engine and transmission weight which enables proper drivetrain stability and alignment needed for safe driving operation. The Rear Crossmember works across all Jeep Patriot versions from 2006 to 2017 to provide enhanced performance and safety through firm maintenance of the chassis frame structure. The performance of Jeep Patriot vehicles depends heavily on maintaining a functional Rear Crossmember because any damage results in major operational problems. The Jeep Patriot maintains its reputation for enduring minimal changes throughout years on the market because the Rear Crossmember establishes a powerful structure for all vehicle components. Through its off-road performance capabilities the Jeep Patriot uses the Rear Crossmember to disperse forces while navigating difficult terrain. The car Rear Crossmember delivers durability which enables successful performance under diverse driving conditions on various terrain types. This distinctive automotive feature stands apart in the market because it improves both the brand model performance and it protects occupants through comfort and safety features. The car Rear Crossmember stands indispensable to ensure both vehicle performance and reliability which strengthens its position among the automaker fans worldwide.

Jeep Patriot Rear Crossmember Parts and Q&A

Suspension Crossmember, Rear
68211932AB
Q: How to remove the Rear Crossmember on Jeep Patriot?
A:
You must first unbolt the rear brake shoes to take out the cross-member. After that, detach the park brake cable from the lever. With the hair pin clip removed, take out the brake cable from its place at the backing plate. After that, undo the bolt and release the Brake Line from the Trailing Arm. After that, remove another bolt, the clip and cut the brake line from the trailing arm. Place the wheel speed sensors out of the way so that you can take out the crossmembers. Should you need to, take out the rear drive module. Get rid of all the cotter pins, nuts and washers and separate the two half shafts. Then, take out both lower strut bolts and trailing link bushing bolts. With the car up on jacks, secure the rear cradle beneath (using a suitable lifting tool) and loosen and take out the rear cradle bolts. At this stage, take out the nuts on the lower stabilizer links, remove the bolts on the lower and upper links at the cradle and unbolt the toe link cams from the cradle. Finally, remove the suspension knuckle assemblies and the stabilizer bushing bolts to separate the stabilizer bar from the cradle.
Rear Crossmember
5115538AB
Q: How to Install and Secure the Bolts for the Front Cross-Member and Rear Crossmember on Jeep Patriot?
A:
Begin by putting the fore/aft crossmember across the center of the car and pushing the anti-roll mount through bolt (2) into it. After that, follow this order: tighten bolt (1) to 78 Nm (58 ft. lbs.), bolt (2) to 78 Nm (58 ft. lbs.) and finish by tightening bolt (3) to 129 Nm (95 ft. lbs.). Following that, set the torque on bolt (2) to 65 Nm (48 ft. lbs.). When a belly pan is included, join it by screwing the three front screws (4) and three rear screws (2) into place and insert a push pin fastener in the center of the belly pan.