How to remove and install Front Engine Mounts on Jeep Wrangler?

The engine is supported on each side by flexible rubber mounts. Begin by cutting off the battery's negative cable, lifting the vehicle and putting supports under the engine. Following that, remove the nut for the through bolt and then both the bolts and nuts from the cushions. Once you're done, take out the through bolt and the engine mount insulator. When installing, if the engine support bracket was taken off, set it on the block and put in the attaching bolts, securing them with 50 Nm (37 ft. lbs.) of torque and the nuts with 34 Nm (25 ft. lbs.). Insert the insulator onto the support bracket and put in the insulator retaining bolts and nuts, tightening each nut to 40 Nm (30 ft. lbs.) torque. Install the through bolt inside the wheel and then put the retaining nut on and tighten the through bolt nut to 48 Nm (35 ft. lbs.) torque. To end, take out the engine support, set the vehicle down and reattach the battery's negative cable.

How to Service and Repair a Front Engine Mount on Jeep Wrangler?

The front engine mount should be serviced by lifting the car on a hoist first. Take out the insulator assembly by removing the front engine mount bolt from the insulator, then remove the front bolts from the mount. If required, take out the front bracket where the engine meets the cab. Start by putting in the insulator mount assembly, then tighten those parts to the engine bolts. Initially install the front engine mount onto the insulator with its bolt; only tighten and lower the engine when you do so. Then, slowly lower your automobile.

OEM Jeep Wrangler Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

44 Engine Mounts found

View related parts
Jeep Wrangler Motor Mount Part Number: 68622629AA
$159.47 MSRP: $239.00
You Save: $79.53 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Mount
- Replaces: 68271527AD, 68271527AC, 68271527AB, 68271527AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited Islander, Unlimited Rubicon, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Motor Mount Part Number: 68412217AB
$152.73 MSRP: $231.00
You Save: $78.27 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount
- Replaces: 68412217AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Unlimited High Altitude 4xe, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara 4xe, Unlimited Sport S 4xe, Unlimited Willys 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Motor Mount Part Number: 68412216AB
$144.87 MSRP: $217.00
You Save: $72.13 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount
- Replaces: 68412216AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Unlimited High Altitude 4xe, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara 4xe, Unlimited Sport S 4xe, Unlimited Willys 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Mount Bracket, Driver Side Part Number: 68490439AA
$97.93 MSRP: $149.00
You Save: $51.07 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Mount Bracket, Passenger Side Part Number: 68490438AA
$94.44 MSRP: $143.00
You Save: $48.56 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Motor Mount Part Number: 68483929AC
$168.82 MSRP: $253.00
You Save: $84.18 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Mount
- Replaces: 68483929AB, 68483929AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Motor Mount Part Number: 68284621AD
$179.01 MSRP: $267.00
You Save: $87.99 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Mount
- Replaces: 68284621AB, 68284621AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Jeep Wrangler | Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
Jeep Wrangler Motor Mount Part Number: 68284620AE
$152.73 MSRP: $231.00
You Save: $78.27 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Mount
- Replaces: 68284620AC, 68284620AD, 68284620AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Jeep Wrangler | Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
Jeep Wrangler Insulator - Transmission Mount Part Number: 68412218AC
$95.74 MSRP: $143.00
You Save: $47.26 (34%)
ADD TO CART
Product Specifications
- Other Name: INSULATOR-TRANSMISSION MOUNT
- Replaces: 68412218AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Freedom, Rubicon, Sport, Sport S, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 2.0L L4, 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Front Mount Part Number: 52017534
$56.43 MSRP: $71.53
You Save: $15.10 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cushion - Engine Support (2.5L); Engine Mount Bracket; Motor Mount; Front Insulator; Insulator, Right, Support Front Cushion; Mount, Engine Right
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Jeep Wrangler | Base, Islander, Rio Grande, S, SE, Sahara | 4 Cyl 2.5 L GAS
View related parts
Jeep Wrangler Transmission Mount Part Number: 68284631AC
$100.51 MSRP: $152.00
You Save: $51.49 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Isolator Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Jeep Wrangler | Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Wrangler Mount Bracket, Driver Side Part Number: 52018697
$8.36 MSRP: $10.60
You Save: $2.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Front Bracket; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Jeep Wrangler | SE | 4 Cyl 2.5 L GAS
View related parts
Jeep Wrangler Transmission Mount Part Number: 68236165AC
$110.17 MSRP: $166.00
You Save: $55.83 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Manual Transmission Mount; Transfer Case Mount; Isolator Transmission Mount
- Replaces: 68236165AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 3.6L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Engine Bracket, Driver Side Part Number: 68480625AA
$101.01 MSRP: $153.00
You Save: $51.99 (34%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount Left Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Tide, Unlimited Islander, Unlimited Rubicon, Unlimited Rubicon X, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wrangler Transmission Mount Bracket Part Number: 68451124AA
$17.56 MSRP: $25.80
You Save: $8.24 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Adaptor; Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Unlimited High Altitude 4xe, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara 4xe, Unlimited Sport S 4xe, Unlimited Willys 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Mount Bracket, Passenger Side Part Number: 52059420AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Jeep Wrangler | SE | 4 Cyl 2.4 L GAS
View related parts
Jeep Wrangler Motor Mount Part Number: 68483928AC
$172.22 MSRP: $259.00
You Save: $86.78 (34%)
Product Specifications
- Other Name: Insulator - Engine Mount; Mount
- Replaces: 68483928AA, 68483928AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Engine Bracket Part Number: 68451120AB
$106.05 MSRP: $159.00
You Save: $52.95 (34%)
Product Specifications
- Other Name: Bracket - Engine Mount; Motor Mount
- Replaces: 68451120AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Unlimited High Altitude 4xe, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara 4xe, Unlimited Sport S 4xe, Unlimited Willys 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Engine Bracket Part Number: 68451121AC
$99.31 MSRP: $149.00
You Save: $49.69 (34%)
Product Specifications
- Other Name: Bracket - Engine Mount; Motor Mount
- Replaces: 68451121AA, 68451121AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Unlimited High Altitude 4xe, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara 4xe, Unlimited Sport S 4xe, Unlimited Willys 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Mount Bracket, Driver Side Part Number: 68284623AA
$82.82 MSRP: $125.00
You Save: $42.18 (34%)
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Engine Bracket; Bracket Engine Mount Left Side; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Jeep Wrangler | Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport | 6 Cyl 3.0 L DIESEL

| Page 1 of 3 |Next >

1-20 of 44 Results

Jeep Wrangler Engine Mount

Choose OEM Engine Mount that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Jeep Wrangler vehicles serves two primary functions: It helps to isolate the noise and Vibrations produced by the Engine also to support and locate the position of the Engine within the Chassis of the vehicle. This helps in the enhancement of comfort and the placements of the engines are important to ensure that safety is achieved and to prevent damaging of parts. In this article, Jeep Wrangler has applied different kinds of Engine Mounts, such as Rubber Bushes, Standard Fluid Filled Hydraulic Type, and advanced type of Electronic Active Type. The traditional kind of mounts can have metal-on-metal contact with rubber spacers in between while hydraulic ones are much more effective in shock absorption. The new active mounts are now more sensitive, changing their stiffness according to the engine speed and ensuring more effective vibration isolation. All types of Engine Mounts are unique in that they have variations in the vibration damping and engine surge control, thus Jeep Wrangler does not compromise on the performance and comfort.

Jeep Wrangler Engine Mount Parts and Q&A

Mount Bracket, Driver Side
52018697
Q: How to remove and install Front Engine Mounts on Jeep Wrangler?
A:
The engine is supported on each side by flexible rubber mounts. Begin by cutting off the battery's negative cable, lifting the vehicle and putting supports under the engine. Following that, remove the nut for the through bolt and then both the bolts and nuts from the cushions. Once you're done, take out the through bolt and the engine mount insulator. When installing, if the engine support bracket was taken off, set it on the block and put in the attaching bolts, securing them with 50 Nm (37 ft. lbs.) of torque and the nuts with 34 Nm (25 ft. lbs.). Insert the insulator onto the support bracket and put in the insulator retaining bolts and nuts, tightening each nut to 40 Nm (30 ft. lbs.) torque. Install the through bolt inside the wheel and then put the retaining nut on and tighten the through bolt nut to 48 Nm (35 ft. lbs.) torque. To end, take out the engine support, set the vehicle down and reattach the battery's negative cable.
Mount Bracket, Driver Side
52059285AB
Q: How to Service and Repair a Front Engine Mount on Jeep Wrangler?
A:
The front engine mount should be serviced by lifting the car on a hoist first. Take out the insulator assembly by removing the front engine mount bolt from the insulator, then remove the front bolts from the mount. If required, take out the front bracket where the engine meets the cab. Start by putting in the insulator mount assembly, then tighten those parts to the engine bolts. Initially install the front engine mount onto the insulator with its bolt; only tighten and lower the engine when you do so. Then, slowly lower your automobile.