Make sure this part fits

Mopar 4885482AC
Control Module, Front

2001-2012 Mopar 4885482AC

Customer Questions & Expert Answers (10)
Mopar 4885482AC Control Module, Front
  • Part Description
    Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor
  • Position
    Front
  • Replaces
    68003999AA, 68038199AA, RL885482AC, 4885482AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004 Chrysler PacificaBase6 Cyl 3.5 L GAS
    2001-2005 Chrysler Town & CountryBase, EL, EX, LX, LXi, Limited, Touring6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2001-2003 Chrysler VoyagerBase, Ec, LX4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2001-2005 Dodge CaravanBase, C/V, Ec, SE, SXT, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2004 Dodge DurangoLimited, SLT, ST6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
    2001-2005 Dodge Grand CaravanAnniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2009 Dodge JourneyR/T, SE, SXT4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
    2008-2011 Dodge NitroDetonator, Heat, R/T, SE, SLT, SXT, Shock6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
    2006 Jeep Commander65th Anniversary Edition, Base, Limited6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
    2005-2006 Jeep Grand Cherokee65th Anniversary Edition, Laredo, Limited, Overland, SRT86 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Any idea if 4885482AC will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4885482AC, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the first step for installation of the new rear blower motor resistor for the 2005 Chrysler Town & Country? Posted by Customer
    A:
    Position the new rear blower motor resistor into the rear HVAC housing.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    What should be done after installing the new resistor for the 2002 Chrysler Voyager? Posted by Customer
    A:
    Reconnect the rear HVAC wire harness connector to the resistor, reinstall the right quarter trim panel and right D-pillar trim panel, and finally reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    How do you finish the process after reconnecting the connectors for the 2002 Dodge Caravan? Posted by Customer
    A:
    Flex the glove box bin sides inward again to roll it upward, then close and latch the glove box, and finally reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    What should be done after installing the resistor block for the 2004 Dodge Durango? Posted by Customer
    A:
    Connect the rear HVAC wire harness connector to the rear blower motor resistor block.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    How long should the blower motor be off before servicing the resistor for the 2009 Dodge Journey? Posted by Customer
    A:
    The blower motor should be off for at least five minutes to allow the resistor to cool.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    What is the first step to service the rear blower motor resistor for the 2005 Dodge Grand Caravan? Posted by Customer
    A:
    Ensure safety by allowing the resistor block to cool for five minutes if the blower motor was previously on.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    What is the first step to remove the blower motor resistor for the 2009 Dodge Nitro? Posted by Customer
    A:
    Disable the airbag system by disconnecting and isolating the negative battery cable, then wait two minutes for the airbag system capacitor to discharge.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    What should be done if the blower motor was previously on for the 2006 Jeep Commander? Posted by Customer
    A:
    Ensure the blower motor has cooled for five minutes, as the resistor can become very hot during operation.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    Q:
    What should be done after installing the blower motor resistor for the 2005 Jeep Grand Cherokee? Posted by Customer
    A:
    Reconnect the wire harness connector to the blower motor resistor and engage the locking tab, then reinstall the glove box and reconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Blower Motor Resistor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Control Module, Front 4885482AC Designed for Proper Fit and Performance

The Mopar part 4885482AC Control Module, Front comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Blower Motor Resistor component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4885482AC Control Module, Front supports Jeep Grand Cherokee, Liberty, Commander alongside Dodge Durango, Grand Caravan, Journey, Chrysler Town & Country, Pacifica, Voyager. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4885482AC. The authentic Mopar component produced by Mopar functions as a Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor and fits into the Front of the vehicle.
The part 4885482AC uses durable material for construction and it weighs 0.90 Pounds while its dimensions are 3.3 x 3.3 x 4.5 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Module; Resistor; Module Power Blower Motor. This product functions as a substitute for 68003999AA, 68038199AA, RL885482AC, 4885482AA. This part 4885482AC is necessary for every vehicle. The inventory system lists this product with SKU: 4885482AC. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.