Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 5103452AA
Washer Pump

1998-2017 Mopar 5103452AA

Customer Questions & Expert Answers (16)
Mopar 5103452AA Washer Pump
Mopar 5103452AA Washer Pump
Mopar 5103452AA Washer Pump
Mopar 5103452AA Washer Pump
Mopar 5103452AA Washer Pump
Mopar 5103452AA Washer Pump
  • Part Description
    Pump - Washer, Windshield; Back Glass Washer Pump; Windshield Washer Pump; Washer Pump Repair Kit
  • Replaces
    55077241AA, 5015938AA, 5012602AA, 55077241AB
  • Manufacturer
    Mopar
Make sure this part fits
$87.90 MSRP: $183.00
You Save: $95.10 (52%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2005 Chrysler Sebring Washer Pump Diagram for 5103452AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 5103452AA

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2004 Chrysler 300MBase, Pro-Am, Special6 Cyl 3.5 L GAS
    1998-2000 Chrysler CirrusLX, LXi4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
    1998-2004 Chrysler ConcordeLX, LXi, Limited6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
    2000-2001 Chrysler LHSBase6 Cyl 3.5 L GAS
    2004-2007 Chrysler PT CruiserBase, Dream Cruiser, GT, Limited, Street Cruiser, Touring4 Cyl 2.4 L GAS
    1999-2006 Chrysler SebringBase, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
    2000-2003 Dodge DurangoBase, R/T, SLT, SLT Plus, SXT, Sport8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2004 Dodge IntrepidBase, ES, Police, R/T, SE, SXT6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
    2000-2005 Dodge NeonACR, Base, ES, High Line, R/T, SE, SRT-4, SXT4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2002-2008 Dodge Ram 1500Laramie, SLT, SRT-10, ST, SXT, Sport, TRX410 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 5103452AA works for my vehicle? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 5103452AA, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should be done after installing the pump motor for the 2002 Chrysler 300M? Posted by Customer
    A:
    Reconnect the wire connectors to the reservoir pump and reinstall the front fascia on the left side, again using a 2x4 for support.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    How should the pump be removed from the reservoir for the 2000 Chrysler Cirrus? Posted by Customer
    A:
    Firmly grasp the pump by hand, twisting and pulling it away from the reservoir and out of the grommet, taking care not to puncture the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What should be done with the rubber grommet for the 2001 Chrysler Concorde? Posted by Customer
    A:
    Remove and discard the rubber grommet from the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What is the first step to service the windshield washer motor for the 2001 Chrysler LHS? Posted by Customer
    A:
    Open the hood and disconnect the negative battery cable remote terminal from the remote battery post.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    How do you remove the pump from the reservoir for the 2001 Chrysler Sebring? Posted by Customer
    A:
    Firmly grasp the pump and twist while pulling it away from the reservoir and out of the grommet, taking care not to puncture the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What connections need to be made after placing the reservoir back for the 2004 Chrysler PT Cruiser? Posted by Customer
    A:
    Connect the washer hoses, ensuring the hose with the white stripe goes on the white side of the pump and the black hose on the black side. Connect the pump wire connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What should be done with the rubber grommet seal for the 2000 Dodge Durango? Posted by Customer
    A:
    Remove and discard the rubber grommet seal from the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    How do you remove the washer reservoir for the 2001 Dodge Intrepid? Posted by Customer
    A:
    Pivot the inboard side of the reservoir forward and lift it out of the vehicle, carefully pulling the pump out of the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What is the installation process for the new washer pump for the 2002 Dodge Neon? Posted by Customer
    A:
    Use a new grommet, install it into the reservoir, position the pump in the hole, and firmly snap it into the grommet while avoiding any punctures to the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What should be done after disconnecting the battery for the 2008 Dodge Ram 1500? Posted by Customer
    A:
    Disconnect the washer hose from the barbed outlet nipple of the washer pump/motor unit and allow the washer fluid to drain into a clean container for reuse.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What should you do after disengaging the snap post for the 2008 Dodge Ram 3500? Posted by Customer
    A:
    Pull the washer pump/motor unit straight out from the washer reservoir far enough to disengage the barbed pump inlet nipple from the rubber grommet seal in the reservoir.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What should be done after disconnecting the battery for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    Disconnect the washer hose from the barbed outlet nipple of the washer pump/motor unit and allow the washer fluid to drain into a clean container for reuse.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What is the first step to service the windshield washer pump for the 2004 Dodge Stratus? Posted by Customer
    A:
    Disconnect and isolate the battery negative remote cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What is the first step to service and repair the Windshield Washer Pump for the 2009 Dodge Viper? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    Q:
    What are the final steps after reinstalling the liner for the 2003 Jeep Grand Cherokee? Posted by Customer
    A:
    Lower the vehicle, refill the washer reservoir with the previously drained washer fluid, and reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Washer Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Washer Pump 5103452AA Designed for Proper Fit and Performance

The Mopar part 5103452AA Washer Pump comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Washer Pump component functions as a reliable support element for essential vehicle systems through its engineered design. This part 5103452AA Washer Pump supports Jeep Grand Cherokee alongside Dodge Ram 1500, Durango, Viper, Chrysler Concorde, LHS, Sebring. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 5103452AA. The authentic Mopar component produced by Mopar functions as a Pump - Washer, Windshield; Back Glass Washer Pump; Windshield Washer Pump; Washer Pump Repair Kit.
The part 5103452AA uses durable material for construction and it weighs 0.60 Pounds while its dimensions are 2.0 x 2.2 x 4.0 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Front Washer Pump; Rear Washer Pump; Pump Washer, Windshield. This product functions as a substitute for 55077241AA, 5015938AA, 5012602AA, 55077241AB. This part 5103452AA is necessary for every vehicle. The inventory system lists this product with SKU: 5103452AA. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.